On Tue, 9 Sep 1997, Tao Lu wrote: > Hi: > > I first time try Linux. After install base system and boot up, I use > dselect to set package. Although the cdrom is installed succefully > during driver disk, the dselect ask me following: > > Insert the CD-ROM and enter the block device name [/dev/cdrom]: > > What is the block device name I should enter? > You have gotten some very broad advice so far, so I thought I would try to simplify things for you.
When you configured the modules (from the driver section), if you didn't already have the driver installed, you installed a driver for your CD-ROM. When this was done /dev/cdrom was linked to that driver. (Note that this was offered in the prompt above) You should be able to press enter and everything should work ok. If this doesn't work, you will need to determine which driver fits your drive (as others have indicated) and use that device instead. Luck, Dwarf -- _-_-_-_-_-_- _-_-_-_-_-_-_- aka Dale Scheetz Phone: 1 (904) 656-9769 Flexible Software 11000 McCrackin Road e-mail: [EMAIL PROTECTED] Tallahassee, FL 32308 _-_-_-_-_-_- If you don't see what you want, just ask _-_-_-_-_-_-_- -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .