I have had great luck with the Netgear RT328. It is cheap ($280) and it is a fully functional router. This one has one ethernet interface and the next model up has a four port hub built in. No messing around with kernel tweaking, or installing an internal card, you just configure it over your LAN via telnet or serial port. It has all the dial on demand and multilink ppp options, and two analog ports like the other more expensive ones. I shopped around a bit before I decided to go with this one and I am very happy with it.
Steven Udell wrote: > Hello, > > I need advice on what ISDN adapter to get. > > I have looked at the: > 3comImpact IQ (serial) "modem" external device.. > But am concerned about the limit of 115K speed on the serial port. > And people say its just a toy..not a solid ISDN choice..(250.00 cost too) > > I have also looked at the: > Cisco 766 or 776 ISDN router external. (quite expensive) > One has just one eth port and the other has an intergrated 4 port 10baseT hub. > On this one how well it would work with Linux. Connected to my Eth card > in my Linux box, would it use diald ? .. Would I compile the linux kernel > with ISDN support for this? > > Or should I go with a lower cost(most likely) ISDN adapter card.. > I don't know which way I should go.. I will need it networked & > I need a analog phone port for a fax & voice phone. I wouldn't mind > useing the Linux kernels ISDN function either.. ;) But what should > I look at..in terms of Adapter cards..suggestions? > > Steve Udell > [EMAIL PROTECTED] > 10 more days till the ISDN wireing is in .... > > -- > Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null -- Gregory Green AdvantageCom, Inc. http://www.advantagecom.com