My computer has 96Meg, the Diamond 3D has 4Meg. However, I always get colormap problem. Look at printout of startx, and I found I was only using 6 bit per RGB. All I specified in XF86Config is 8, 16, etc. Seems I'm out of luck to get more colormaps...
Thanks. Jinsong ---------------------------- (--) S3V: PCI: ViRGE rev 5, Linear FB @ 0xe0000000 (--) S3V: card type: PCI (--) S3V: chipset: ViRGE rev. 5 (--) S3V: chipset driver: s3_ViRGE (--) S3V: videoram: 4096k (--) S3V: Ramdac type: s3_trio64 (--) S3V: Ramdac speed: 135 MHz (--) S3V: Using Trio32/64 programmable clock (MCLK 54.886 MHz) (--) S3V: Maximum allowed dot-clock: 135.000 MHz (**) S3V: Mode "1024x768": mode clock = 85.000 (--) S3V: Operating RAMDAC in pixel multiplex mode (--) S3V: Using 6 bits per RGB value (**) S3V: Virtual resolution set to 1024x768 (--) S3V: Local bus LAW is 0xE00xxxxx (--) S3V: Using a banksize of 4096k, line width of 1024