Hi : > > > Hello everyone, I just got kernel 2.1.128 up and running. I am loading > > sound as a module. When I try to cat something to the device I get this > > error message: > > > > [paul:~/multimedia/next-gen]$ cat youronbd.au > /dev/audio > > bash: /dev/audio: Operation not supported by device > > > > tail of /var/log/kern.log shows: > > Nov 14 23:09:48 data kernel: Soundblaster audio driver Copyright (C) by > > Hannu Savolainen 1993-1996 > > Nov 14 23:09:48 data kernel: sb: dsp reset failed. > > > > > > lsmod shows: > > Module Size Used by > > uart401 5696 0 > > sound 58064 0 (autoclean) [uart401] > > soundcore 2120 3 (autoclean) [sound] > > > > I know that sb.o is not loaded. If I try to load it it say the the device > > or resource is busy. > > > You need to specify the options to sb > > Here's what I use to get mine loaded (after running isapnp > > insmod soundcore > insmod sound > insmod opl3 > insmod uart401 > insmod sb io=0x220 irq=5 dma=1 mpu_io=0x330 > insmod adlib_card io=0x388 > >
I have a Yamaha OPL3-SA3, I compiled the driver for its as module and I'm specifying all options of the driver. The loading process goes without problems but the /dev/sndstat don't report installed drivers and card config. The parameter are right, I'm using this card with kernel 2.0.35. Someone have any idea for solving this problem? Hernán. Hernán J Cervantes Rodríguez Instituto de Física da USP e-mail : [EMAIL PROTECTED] homepage : http://fge.if.usp.br/~hernan/