Hey, that worked wonderfully. Now I have another question: I can telnet from one machine, running Debian 1.3, to another, running 2.1, and everything acts normally. When I do it the other way, from the Slink machine to the Bo machine, it takes forever to get to a login: prompt. What might be causing that?
On Thu, 29 Apr 1999, [ISO-8859-1] Nils-Erik Svang?rd wrote: > Hi > 1: run modconf as root, go into the subdir net an press enter on the ne200 > module, the module should prompt you for a io adress enter io=0x300 or 330 > depending of what you have. Then hopefully you can read Installation > successfull on the screen. > 2: Configure the network (/etc/init.d/network) > /nisse > > On Wed, 28 Apr 1999, Robert Kerr wrote: > > > Okay, is there any walk-through written on how to configure my home > > network? I've got two machines, with NE2000-compatible network cards. > > I've recompiled my kernel to give me module support of them, but now I'm > > stuck. Can anyone point me in the right direction so I can find the > > instructions? > > > > (FWIW I've read the NET-3 HowTo, and find it sadly lacking.) > > > > Thanks > > > > -bob > > > > Cananyonepleasetellmehowtofixmyspacebar? > > ********************************************************************** > > * Robert Kerr, The morphing guy. * 368 Clyde Building, BYU * > > * [EMAIL PROTECTED] * Provo, Utah 84602 * > > * [EMAIL PROTECTED] * Phone: (801) 378-2029 * > > * http://www.et.byu.edu/~kerrr * Fax: (801) 378-4449 * > > ********************************************************************** > > > > > > > > -- > > Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null > > > -bob Cananyonepleasetellmehowtofixmyspacebar? ********************************************************************** * Robert Kerr, The morphing guy. * 368 Clyde Building, BYU * * [EMAIL PROTECTED] * Provo, Utah 84602 * * [EMAIL PROTECTED] * Phone: (801) 378-2029 * * http://www.et.byu.edu/~kerrr * Fax: (801) 378-4449 * **********************************************************************
