> Edson Santos wrote: > > On my Opti930 sound card the device manager shows a yellow exclamation > mark by the Opti930 Sound/OPL3 Device. In the device status it says > that it has a (code 10). I have changed the IRQ and DMA I have had > trouble for a long time please could you advise me. And could I > install a new sound card and would it conflict like the one I have.
You're asking a Linux list for help on (apparently) Windows. Nonetheless, what I'd suggest doing is seeing if the card has a DOS-based diagnostic program; run it to verify the hardware and settings are okay. Then I'd suggest getting the newest correct drivers for the card; I've seen lots of instances where the wrong driver is installed because the names are all so similar ("ATI Rage II+ vs ATI Rage II Plus"); 85% of the time having the correct driver will solve these kinds of problems. If that doessn't help, you might seek out a mailing list that caters to Windows, or alternatively (and better), dump Windows and install Debian GNU/Linux and I'm sure this list will be more than happy to help you get your sound card working.