Hi there, I have an Intel Ether Express 16 ISA card and I'm trying to get it to work with linux. Linux seems to detect the card ok, but after detection on boot up I get the message:
eth0: TDR reports transceiver problem The dos diagnostics program for the card indicates that everything is OK, and it seems to work fine with Windows 98....I have included my boot message,...followed by the result of ifconfig... Any help is appreciated, Thanx, Manuel ------------------------------------------------------------------ Memory: sized by int13 088h Console: 16 point font, 400 scans Console: colour VGA+ 80x25, 1 virtual console (max 63) pcibios_init : BIOS32 Service Directory structure at 0x000fad40 pcibios_init : BIOS32 Service Directory entry at 0xfb1c0 pcibios_init : PCI BIOS revision 2.10 entry at 0xfb1f0 Probing PCI hardware. Calibrating delay loop.. ok - 53.25 BogoMIPS Memory: 30216k/32768k available (1136k kernel code, 384k reserved, 1032k data) Swansea University Computer Society NET3.035 for Linux 2.0 NET3: Unix domain sockets 0.13 for Linux NET3.035. Swansea University Computer Society TCP/IP for NET3.034 IP Protocols: IGMP, ICMP, UDP, TCP VFS: Diskquotas version dquot_5.6.0 initialized Checking 386/387 coupling... Ok, fpu using exception 16 error reporting. Checking 'hlt' instruction... Ok. Intel Pentium with F0 0F bug - workaround enabled. alias mapping IDT readonly ... ... done Linux version 2.0.36 ([EMAIL PROTECTED]) (gcc version 2.7.2.3) #2 Sun Feb 21 15:55:27 EST 1999 Starting kswapd v 1.4.2.2 Real Time Clock Driver v1.09 tpqic02: Runtime config, $Revision: 0.4.1.5 $, $Date: 1994/10/29 02:46:13 $ tpqic02: DMA buffers: 20 blocks, at address 0x282600 (0x28254c) Ramdisk driver initialized : 16 ramdisks of 4096K size loop: registered device at major 7 ide: i82371 PIIX (Triton) on PCI bus 0 function 57 ide0: BM-DMA at 0xf000-0xf007 ide1: BM-DMA at 0xf008-0xf00f hdc: IBM-DAQA-32160, 2067MB w/96kB Cache, CHS=4200/16/63, DMA hdd: TATUNG CD-652E, ATAPI CDROM drive ide1 at 0x170-0x177,0x376 on irq 15 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 md driver 0.36.3 MAX_MD_DEV=4, MAX_REAL=8 Failed initialization of WD-7000 SCSI card! scsi : 0 hosts. scsi : detected total. Partition check: hdc: [PTBL] [525/128/63] hdc1 hdc2 hdc3 hdc4 < hdc5 hdc6 hdc7 hdc8 > VFS: Mounted root (ext2 filesystem) readonly. Adding Swap: 12060k swap-space (priority -1) Adding Swap: 16092k swap-space (priority -2) Module inserted $Id: cdrom.c,v 0.8 1996/08/10 10:52:11 david Exp $ eth0: EtherExpress 16 at 0x300 (IRQ 5, RJ45 connector, 16-bit bus, 32k RAM) eth0: TDR reports transceiver problem Serial driver version 4.13 with no serial options enabled tty00 at 0x03f8 (irq = 4) is a 16550A tty01 at 0x02f8 (irq = 3) is a 16550A ------------------------------------------------------------------ lo Link encap:Local Loopback inet addr:127.0.0.1 Bcast:127.255.255.255 Mask:255.0.0.0 UP BROADCAST LOOPBACK RUNNING MTU:3584 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 Collisions:0 eth0 Link encap:Ethernet HWaddr 00:AA:00:3C:20:89 inet addr:192.168.0.20 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:6 dropped:0 overruns:0 carrier:6 Collisions:0 Interrupt:5 Base address:0x300