On Sat, Oct 09, 1999 at 09:10:36AM -0600, [EMAIL PROTECTED] wrote: > Wouter, > > My setup is similar. Is that the only video line in your lilo.conf? Yep.
> Also, where did you put it? (in case it matters). boot=/dev/hda7 install=/boot/boot.b map=/boot/map delay=20 default=Linux image=/boot/vmlinuz-2.2.12 label=Linux root=/dev/hda7 read-only append="video=matrox:xres:900,yres:650,depth:8,pixclock:17000" That clear enough? I think your problem is that there are matrox drivers for the mystique and the g200 series, so the g400 series may not yet be supported. In that case the vesa framebuffer drivers should work, however, that will result in very low refresh rates :( > > >From make menuconfig: > > | | <*> Matrox acceleration | > > | | [ ] Millennium I/II support | > > | | [*] Mystique support | > > | | [ ] G100/G200 support | So G100/200 but not G400??? Wouter...