On Fri, 4 Feb 2000, Pedro Quaresma de Almeida wrote: quares >At boot time it says: quares >... quares >FDC0 is post-1991 82077 quares > The PCI-Bios has not enabled this device! Updating PCI command 0000 -> 0005 quares >eth0: 3COM 3c905B Cyclone 100Base Tx IRQ5
i've had this problem too, updating the drivers or changing the slot teh device is in usually fixes it for me.. try moving the slot, make sure that it's not conflicting with anything, also go to the bios and tell it to reset the pnp data, usually an option called 'RESET NVRAM' or 'Reset configuration data' or something similar. nate ----------------------------------------[mailto:[EMAIL PROTECTED] ]-- Vice President Network Operations http://www.firetrail.com/ Firetrail Internet Services Limited http://www.aphroland.org/ Everett, WA 425-348-7336 http://www.linuxpowered.net/ Powered By: http://comedy.aphroland.org/ Debian 2.1 Linux 2.0.36 SMP http://yahoo.aphroland.org/ -----------------------------------------[mailto:[EMAIL PROTECTED] ]-- 7:38am up 168 days, 19:49, 3 users, load average: 2.29, 1.71, 1.32