I have Awe64 and managed to get it to work. Here is how I did it: 1. isapnp it. WHen you run pnpdump, you'll get 2 files: isapnp.conf and isapnp.gone. .gone file will tell you where NOT to put the card. Based on that information, make hte .conf file appropriately. I found that my card works perfectly without the Wave-table, so really all you need to setup in isapnp.conf is the first card entry. 2. WHen this is done, compile kernel, and include everything you need as modules. Soundcard <M>, OSS <M>, SB <M>, Opl3 synth. <M>, and low-level driver Awe64 <M>. Maybe I'm mising one or two, I'm doing this from memory. 3. make bzImage, make modules, make modules_install. 4. reboot. 5. Go to /usr/src/linux/modules, and lsmod to make sure you have no modules installed for sound. modprobe sound insmod uart401 insmod opl3 insmod sb param. from isapnp.conf
Also, you may need to go to /dev and ./MAKEDEV audio Then addgroup user audio. This pretty much is it. I realize this is a hard way to do this, but it works for me. Andrew ------------------------------------------------------------------------- Andrei S. Ivanov [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] http://arhses.dyndns.org -| http://scorpio.dynodns.net -| http://scorpio.myip.org -| <--All the pages bundled together. UIN 12402354 For GPG key, go to above URL/GnuPG -------------------------------------------------------------------------