That did it, thanks. I am now having problems with it hanging during the boot. It finds the card and drives, but it hangs after the lines:
ide0 at 0xblah, 0xblah on irq 10 ide1 at 0xblah, 0xblah on irq 15 Any ideas why this might be hanging? Thanks Kelly Corbin [EMAIL PROTECTED] Jeff Noxon wrote: > > Basically, you do the following: > > tar xfz linux-2.2.15.tar.gz (This you have probably done already, but make > sure you start with a clean source tree) > > cd linux > > gunzip -dc /wherever/ide.2.2.15.20000509.patch.gz | patch -p1 > > make menuconfig (make sure to enable Promise support. If you are booting > the Promise controller and not your onboard chipset, there > is also an option for that... Read the help.) > > make-kpkg kernel_image (or whatever you normally do to make kernels) > > I hope this helps. > > Regards, > > Jeff >