On Sun, Feb 02, 2003 at 10:42:36PM -0500, Paul M Foster wrote: > from the console (after _any_ amount of time), the screen is blank, and > after a second or two, the monitor loses its signal from the PC (it's
This could be related to DPMS. It may help to disable the DPMS option in /etc/X11/XF86Config-4. Eventually, your monitor doesn't like the video frequencies it gets when you switch back from the console and automatically turns off to protect against damage. The video timings and frequencies may be different from XF 3.x to XF 4.x, thus you don't encounter the problem with XF 3.x. Start up X11 in a lower resolution/with lower frequencies and try switching to check wheather the problem persists --- or try another monitor if you've one at hand. Alternatively, try turning the monitor completely off manually and turn it back on when it has lost the signal to see if it would make a picture after switching. GH -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
