Am Donnerstag, 13. Februar 2003 13.16 schrieb Klaus Thielking-Riechert: > Hi Marco, > > with this printer you should the hpoj package as suggested > at www.linuxprinting.org. You can find installation instructions > at the hpoj homepage (http://hpoj.sourceforge.net/). > > I have recently configured cups to work with hpoj and a > HP PSC 2210 -- it works definitely correct with the version > 0.9 of hpoj (Woody comes with 0.8).
thanks - I tried this - the scanning from the usb-bus did not find something. :-( After installing a new printer in cups I get the same error again Unable to open USB port device file "/dev/usb/lp0": No such device Is there a possiblity to check if my usb works correct - usbview shows nothing > > Regards, > > Klaus > > > I activate usb in the kernel: > > Feb 10 21:49:10 debian kernel: usb.c: registered new driver hid > > Feb 10 21:49:10 debian kernel: hid-core.c: v1.8.1 Andreas Gal, > > Vojtech Pavlik <[EMAIL PROTECTED]> > > Feb 10 21:49:10 debian kernel: hid-core.c: USB HID support drivers > > > > with modprobe printer > > I can see in lsmod the printer > > > > In Cups I can configure the printer. Status is going to idle till I want > > to test the printer... I get the message: > > Unable to open USB port device file "/dev/usb/lp0": No such device > > > > The device I can show with "l /dev/usb/" > > Do you have an idea what i am doing wrong > > > > Thanks > > Marco -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
