On Wed, 10 January 2001, "fam van Marrewijk" wrote:

> 
> 
> ----- Original Message -----
> From: <[EMAIL PROTECTED]>
> Newsgroups: linux.debian.user
> Sent: Tuesday, January 09, 2001 5:24 AM
> Subject: Re: Unable to Install Debian From CD
> 
> 
> >
> > > On 7 Jan 2001 [EMAIL PROTECTED] wrote:
> > >
> > > > I have run dbootstrap from the Debian CD and installed the base
> system. I've done all the steps up to the point where the system is
> rebooted. When it reboots from a diskette, it runs the first part of the
> installation (set up partitions, install base system etc.), but if I try to
> access the CD, it says CDROM mount failed.
> > > >
> > > > When it boots from the HDD, I see that it finds the CDROM and calls it
> hdb. But when I run dselect, it only gives three options for access methods:
> > > >
> > > >    nfs       install from an NFS server (not yet mounted)
> > > >    floppy  install from a pile of floppy disks
> > > >  * apt     APT acquisition (file,http,ftp)
> > > >
> > > > I want to continue the installation from the CDROM discs resuming at
> the point where the Debian installation system boots from a Linux HDD, but I
> do not know how to proceed. Could someone provide assistance? Thank you.
> > > >
> > > > NOTES: The BIOS of my system does not support booting from CDROM. I
> believe I am using a standard ATAPI IDE drive (Wearnes CDS-2420). The CDROM
> drive is slaved to the HDD on the primary channel of an add-in IDE
> controller.
> > > >
> > On Sun, 07 January 2001, Sebastiaan wrote:
> >
> > >
> > > Hi,
> > >
> > > have you included a /cdrom line in your fstab? If the installation
> program
> > > cannot find a cdrom itself, you are able to fix it this way, I think,
> > >
> > > Greetz,
> > > Sebastiaan
> > >
> > >
> > >On 7 Jan 2001 [EMAIL PROTECTED] wrote:
> > >
> > >Hello there. I have the following line in /etc/fstab:
> > >/dev/cdrom    /cdrom   iso9660 defaults,ro,user,noauto    0  0
> > >
> > >Thanks, Brad.
> >
> > I found the problem. It seems that the drive I was using was "compatible"
> but had to be inisialised by the DOS driver before it would work under
> Linux. However, I borrowed a CD drive from another computer that Linux
> supports directly and had no problems with it (the original drive was
> malfunctioning anyway).
> 
> i think you most setup in your bios boot from cd
> >
> > -Brad

That's one way of doing it, but my computer has an old BIOS that does not
support booting from the CD-ROM.


_______________________________________________________
Are you a Techie? Get Your Free Tech Email Address Now!
Many to choose from! Visit http://www.TechEmail.com

Reply via email to