Well, after all the trail, I still don't have any luck. I install xlibmesa3 and removed mesag3. glxinfo gets me now Mesa GLX Indirect rendering instead of Mesa X11 rendering. Then I use 16 and 32 bpp to activate DRI. system still freezed. and i don't have any log file left too because of the system freeze. for normal 24 bpp. I have irq for the card. bus mastering on, I am using kernel 2.4.1 with mga.o and the necessary stuff. but there is a warning in the config saying
(**) MGA(0): Using AGP Mode 4x (--) MGA(0): Linear framebuffer at 0xCE000000 (--) MGA(0): MMIO registers at 0xCD000000 (--) MGA(0): Pseudo-DMA transfer window at 0xCC800000 (--) MGA(0): BIOS at 0xCDFF0000 (--) MGA(0): Video BIOS info block at offset 0x07A80 (WW) MGA(0): Video BIOS info block not detected! (II) MGA(0): MGABios.RamdacType = 0x0 (==) MGA(0): Write-combining range (0xce000000,0x2000000) (--) MGA(0): VideoRAM: 32768 kByte could it be the problem? and also I have trouble trying to use DDC for my Optiquest V95 monitor... pls help Edwin Lau On Wed, 14 Feb 2001 11:05:01 Joris Lambrecht wrote: > I remember reading that kernel 2.4.1(01?) has improved handling of the > G400 > cards and fixes some (if not all ...) known issues, i'd suggest you'd > take a > look at this kernel. The 2.4.x kernels really impressed me, if the rest > of > linux development would have similar level of quality linux would > definetly > rule the desktop. > > -----Original Message----- > From: Chun Kit Edwin Lau [mailto:[EMAIL PROTECTED] > Sent: Wednesday, February 14, 2001 11:49 AM > To: Damon Muller > Cc: User Debian > Subject: Re: XFree86 4.0.2 and Matrox G400 > > > I am using 2.2.18 and have agp, via, dri compiled in the kernel, but > leaving mga as a module and i guess I have the same problem as you. X4.02 > crashes my machine at 16 and 32bpp. I guess it has to do will drm. When i > check the XF86 website, it seems to be that they suggested kernel 2.4.x > kernel. I haven't given it a shot yet. and i also said in the site that > disable the dri in the kernel for 2.4.x. (don't know about 2.2.18) > > Edwin Lau > > On Wed, 14 Feb 2001 01:56:31 Damon Muller wrote: > > Quoth Chun Kit Edwin Lau, > > > ok you have the dri working fine? well, for some unknown reason. in > the > > > XFree.0.log, it said direct rendering disable. don't know why? what > > option > > > did you include in the kernel? thanx > > > > What colour depth are you using? dri/drm only working in 16 and 32bpp. > > If you are using anything else, it will be disabled. This bit me > > originally as I was using 24bpp (which turned out to be a good thing, > as > > that particular original driver and X4.02 didn't like each other, so > > launching into dri/drm mode crashed the machine). > > > > Other than that, make sure you've got agpgart compiled in or as a > > module, along with the correct motherboard chipset support. > > > > cheers, > > > > damon > > > > -- > > Damon Muller | Did a large procession wave their torches > > Criminologist/Linux Geek | As my head fell in the basket, > > http://killfilter.com | And was everybody dancing on the casket... > > PGP (GnuPG): A136E829 | - TBMG, "Dead" > > > > Edwin Lau ([EMAIL PROTECTED]) > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] > > Edwin Lau ([EMAIL PROTECTED])