On Sunday 25 March 2001 22:27, Matthew Dalton wrote: > Michael Dickey wrote: > > eth0: Xircom Cardbus Adapter (DEC 21143 compatible mode) rev 3 at 0xa00, > > 00:10:A4:E6:B8:2E, IRQ 3. > > eth0: MII transceiver #0 config 3100 status 7809 advertising 01e1. > > serial_attach(bus 35, fn 1) > > tty00 at 0x0a80 (irq = 3) is a 16550A > > Does it work if you don't have your Xircom card inserted?
seems that it will! Before pcmcia card: $ cat /proc/tty/driver/serial serinfo:1.0 driver:4.27 0: uart:16550A port:3F8 irq:4 baud:9600 tx:0 rx:0 1: uart:16550A port:480 irq:3 tx:0 rx:0 CTS|DSR|CD|RI 2: uart:unknown port:3E8 irq:4 3: uart:unknown port:2E8 irq:3 After inserting card: $ cat /proc/tty/driver/serial serinfo:1.0 driver:4.27 0: uart:16550A port:A80 irq:3 baud:9600 tx:0 rx:0 CTS|DSR 1: uart:unknown port:2F8 irq:3 2: uart:unknown port:3E8 irq:4 3: uart:unknown port:2E8 irq:3 4: uart:unknown port:3220 irq:3 5: uart:unknown port:3228 irq:3 6: uart:unknown port:4220 irq:3 7: uart:unknown port:4228 irq:3 8: uart:unknown port:5220 irq:3 9: uart:unknown port:5228 irq:3 > > eth0: Promiscuous mode enabled. > > device eth0 entered promiscuous mode > > This worries me. Why is your network card going into promiscuous mode? I have to do this to make the card work - done on purpose... Michael _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com
