On Mon, Jul 23, 2001 at 09:31:42PM -0500, Jeremy wrote: > output of dmesg: > > Serial driver version 5.05a (2001-03-20) with MANY_PORTS SHARE_IRQ SERIAL_PCI > ISAPNP enabled > ttyS00 at 0x03f8 (irq = 4) is a 16550A > ttyS01 at 0x02f8 (irq = 3) is a 16550A > Redundant entry in serial pci_table. Please send the output of > lspci -vv, this message (4793,4104,4793,215) > and the manufacturer and name of serial board or modem board > to [EMAIL PROTECTED] ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ you should perhaps do this > ttyS04 at port 0xac00 (irq = 5) is a 16550A > > output of setserial /dev/ttyS2 uart 16550A port 0xac00 irq 5: > Cannot set serial info: Address already in use
Edit /etc/init.d/setserial to not autodetect ttyS2 and ttyS3 and setup ttyS2 with the above parameters specified. > output of setserial /dev/ttyS04 uart 16550A port 0xac00 irq 5: > /dev/ttyS04: No such file or directory Maybe it works after you "MAKEDEV /dev/ttyS4", but it would be more interesting to get the pci_table problem solved. > > > with anyone and if anyone has any suggestions. Please sanitize your emails when participating in a thread on a mailing list. There's no need to keep resending text that has already been received before by everyone on the list. Cheers, Joost