I get this whenever I have xinerama enabled which it looks like you don't. Same int 11 internal server error. Just downgrade by apt-get xfree86-common/testing etc for each xfree package (xserver-xfree86 xserver-common and the fonts if they complain)on your system. That should downgrade it to something tolerable.
--mike On 07 Aug 2001 15:32:54 -0500, Oleksandr Moskalenko wrote: > Hello, > > I hope someone will have a clue because I have exhausted my resources. > I've been running XFree86 4.0.x happily on my Toshiba Protege 660CDT. > However, since last week's upgrade to 4.1.0 I can't use X anymore. It > just segfaults in the middle of what appears to be a normal load. This > is the log file. Please help me figure it out. I haven't changed > anything in my XF86Config-4. Below are the console log and > /var/log/XFree86.0.log. Attached is my XF86Config-4 > > Console log I get while startx is running > ============================ > XFree86 Version 4.1.0 / X Window System > (protocol Version 11, revision 0, vendor release 6510) > Release Date: 2 June 2001 > If the server is older than 6-12 months, or if your card is > newer than the above date, look for a newer version before > reporting problems. (See http://www.XFree86.Org/FAQ) > Build Operating System: Linux 2.4.7 i686 [ELF] > Module Loader present > (==) Log file: "/var/log/XFree86.1.log", Time: Tue Aug 7 15:30:07 2001 > (==) Using config file: "/etc/X11/XF86Config-4" > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) ServerLayout "Default Layout" > (**) |-->Screen "Default Screen" (0) > (**) | |-->Monitor "Generic Monitor" > (**) | |-->Device "Generic Video Card" > (**) |-->Input Device "Generic Keyboard" > (**) XKB: rules: "xfree86" > (**) XKB: model: "pc101" > (**) XKB: layout: "us" > (**) |-->Input Device "Configured Mouse" > (**) |-->Input Device "Generic Mouse" > (**) FontPath set to > "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/cyrillic,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi" > (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" > (==) ModulePath set to "/usr/X11R6/lib/modules" > (--) using VT number 7 > > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Module bitmap: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > (II) Module pcidata: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 0.1.0 > (II) Loading /usr/X11R6/lib/modules/libscanpci.a > (II) Module scanpci: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 0.1.0 > (II) Unloading /usr/X11R6/lib/modules/libscanpci.a > (--) PCI:*(0:4:0) C&T 65554 rev 194, Mem @ 0xfe000000/24 > (II) Loading /usr/X11R6/lib/modules/libddc.a > (II) Module ddc: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a > (II) Module dbe: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a > (II) Module extmod: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a > (II) Module pex5: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a > (II) Module record: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.13.0 > (II) Loading /usr/X11R6/lib/modules/extensions/libxie.a > (II) Module xie: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a > (II) Module freetype: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.1.9 > (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a > (II) Module speedo: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a > (II) Module type1: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/libvbe.a > (II) Module vbe: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/linux/libint10.a > (II) Module int10: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/drivers/chips_drv.o > (II) Module chips: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o > (II) Module mouse: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > (II) CHIPS: Driver for Chips and Technologies chipsets: ct65520, ct65525, > ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, > ct65554, ct65555, ct68554, ct69000, ct69030, ct64200, ct64300 > (--) Assigning device section with no busID to primary device > (--) Chipset ct65554 found > (II) Loading /usr/X11R6/lib/modules/libvgahw.a > (II) Module vgahw: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 0.1.0 > (II) CHIPS(0): initializing int10 > (II) CHIPS(0): Primary V_BIOS segment is: 0xe400 > (II) CHIPS(0): VESA BIOS detected > (**) CHIPS(0): Depth 16, (--) framebuffer bpp 16 > (==) CHIPS(0): RGB weight 565 > (==) CHIPS(0): Default visual is TrueColor > (==) CHIPS(0): Using gamma correction (1.0, 1.0, 1.0) > (==) CHIPS(0): Using HW cursor > (**) CHIPS(0): Enabling linear addressing > (--) CHIPS(0): base address is set at 0xFE000000. > (**) CHIPS(0): Using MMIO > (--) CHIPS(0): VideoRAM: 2048 kByte > (--) CHIPS(0): TFT probed > (--) CHIPS(0): LCD > (--) CHIPS(0): Display Size: x=800; y=600 > (--) CHIPS(0): PCI Bus > (--) CHIPS(0): Internal DAC disabled > (--) CHIPS(0): Using programmable clocks > (--) CHIPS(0): Dot clock 0: 25.172 MHz > (--) CHIPS(0): Dot clock 1: 28.325 MHz CRTclk > (--) CHIPS(0): Dot clock 2: 40.090 MHz FPclk > (--) CHIPS(0): Probed memory clock of 40.090 MHz > (==) CHIPS(0): Min pixel clock is 11.000 MHz > (--) CHIPS(0): Max pixel clock is 56.125 MHz > (II) CHIPS(0): VESA VBE DDC supported > (II) CHIPS(0): Manufacturer: TOS Model: 5081 Serial#: 0 > (II) CHIPS(0): Year: 1995 Week: 20 > (II) CHIPS(0): EDID Version: 1.0 > (II) CHIPS(0): Digital Display Input > (II) CHIPS(0): Max H-Image Size [cm]: horiz.: 23 vert.: 17 > (II) CHIPS(0): Gamma: 1.00 > (II) CHIPS(0): No DPMS capabilities specified; RGB/Color Display > (II) CHIPS(0): redX: 0.000 redY: 0.000 greenX: 0.000 greenY: 0.000 > (II) CHIPS(0): blueX: 0.000 blueY: 0.000 whiteX: 0.000 whiteY: 0.000 > (II) CHIPS(0): Supported VESA Video Modes: > (II) CHIPS(0): [EMAIL PROTECTED] > (II) CHIPS(0): [EMAIL PROTECTED] > (II) CHIPS(0): [EMAIL PROTECTED] > (II) CHIPS(0): Manufacturer's mask: 0 > (II) CHIPS(0): Generic Monitor: Using hsync range of 29.00-61.00 kHz > (II) CHIPS(0): Generic Monitor: Using vrefresh range of 40.00-85.00 Hz > (II) CHIPS(0): Clock range: 11.00 to 56.12 MHz > (II) CHIPS(0): Not using default mode "800x600" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1024x768" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1024x768" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1024x768" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1024x768" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1024x768" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1152x864" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1280x960" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1280x960" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1280x1024" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1280x1024" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1280x1024" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1792x1344" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1792x1344" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1856x1392" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1856x1392" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1920x1440" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1920x1440" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1400x1050" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1400x1050" (insufficient memory for > mode) > (--) CHIPS(0): Virtual size is 800x600 (pitch 800) > (**) CHIPS(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz > (**) CHIPS(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz > (--) CHIPS(0): Display dimensions: (23, 17) cm > (--) CHIPS(0): DPI set to (88, 89) > (II) Loading /usr/X11R6/lib/modules/libfb.a > (II) Module fb: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/libxaa.a > (II) Module xaa: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/libramdac.a > (II) Module ramdac: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 0.1.0 > > Fatal server error: > Caught signal 11. Server aborting > > > When reporting a problem related to a server crash, please send > the full server output, not just the last messages. > This can be found in the log file "/var/log/XFree86.1.log". > Please report problems to [EMAIL PROTECTED] > > XIO: fatal IO error 104 (Connection reset by peer) on X server ":1.0" > after 0 requests (0 known processed) with 0 events remaining. > ===================================================================== > > My /var/log/XFree86.0.log: > ============================ > XFree86 Version 4.1.0 / X Window System > (protocol Version 11, revision 0, vendor release 6510) > Release Date: 2 June 2001 > If the server is older than 6-12 months, or if your card is > newer than the above date, look for a newer version before > reporting problems. (See http://www.XFree86.Org/FAQ) > Build Operating System: Linux 2.4.7 i686 [ELF] > Module Loader present > (==) Log file: "/var/log/XFree86.0.log", Time: Tue Aug 7 15:13:11 2001 > (==) Using config file: "/etc/X11/XF86Config-4" > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) ServerLayout "Default Layout" > (**) |-->Screen "Default Screen" (0) > (**) | |-->Monitor "Generic Monitor" > (**) | |-->Device "Generic Video Card" > (**) |-->Input Device "Generic Keyboard" > (**) Option "XkbRules" "xfree86" > (**) XKB: rules: "xfree86" > (**) Option "XkbModel" "pc101" > (**) XKB: model: "pc101" > (**) Option "XkbLayout" "us" > (**) XKB: layout: "us" > (==) Keyboard: CustomKeycode disabled > (**) |-->Input Device "Configured Mouse" > (**) |-->Input Device "Generic Mouse" > (**) FontPath set to > "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/cyrillic,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi" > (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" > (==) ModulePath set to "/usr/X11R6/lib/modules" > (--) using VT number 7 > > (II) Open APM successful > (II) Module ABI versions: > XFree86 ANSI C Emulation: 0.1 > XFree86 Video Driver: 0.4 > XFree86 XInput driver : 0.2 > XFree86 Server Extension : 0.1 > XFree86 Font Renderer : 0.2 > (II) Loader running on linux > (II) LoadModule: "bitmap" > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Module bitmap: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.2 > (II) Loading font Bitmap > (II) LoadModule: "pcidata" > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > (II) Module pcidata: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.4 > (II) PCI: Probing config type using method 1 > (II) PCI: Config type is 1 > (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 > (II) PCI: PCI scan (all values are in hex) > (II) PCI: 00:00:0: chip 1179,0601 card 0000,0000 rev 11 class 06,00,00 hdr 00 > (II) PCI: 00:04:0: chip 102c,00e4 card 0000,0000 rev c2 class 03,00,00 hdr 00 > (II) PCI: End of PCI scan > (II) LoadModule: "scanpci" > (II) Loading /usr/X11R6/lib/modules/libscanpci.a > (II) Module scanpci: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.4 > (II) UnloadModule: "scanpci" > (II) Unloading /usr/X11R6/lib/modules/libscanpci.a > (II) Host-to-PCI bridge: > (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) > (II) Bus 0 I/O range: > [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) Bus 0 non-prefetchable memory range: > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > (II) Bus 0 prefetchable memory range: > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > (--) PCI:*(0:4:0) C&T 65554 rev 194, Mem @ 0xfe000000/24 > (II) Addressable bus resource ranges are > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) OS-reported resource ranges: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) Active PCI resource ranges: > [0] -1 0 0xfe000000 - 0xfeffffff (0x1000000) MX[B](B) > (II) Active PCI resource ranges after removing overlaps: > [0] -1 0 0xfe000000 - 0xfeffffff (0x1000000) MX[B](B) > (II) OS-reported resource ranges after removing overlaps with PCI: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) All system resource ranges: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xfe000000 - 0xfeffffff (0x1000000) MX[B](B) > [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) LoadModule: "ddc" > (II) Loading /usr/X11R6/lib/modules/libddc.a > (II) Module ddc: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.4 > (II) LoadModule: "dbe" > (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a > (II) Module dbe: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension DOUBLE-BUFFER > (II) LoadModule: "extmod" > (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a > (II) Module extmod: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension SHAPE > (II) Loading extension MIT-SUNDRY-NONSTANDARD > (II) Loading extension BIG-REQUESTS > (II) Loading extension SYNC > (II) Loading extension MIT-SCREEN-SAVER > (II) Loading extension XC-MISC > (II) Loading extension XFree86-VidModeExtension > (II) Loading extension XFree86-Misc > (II) Loading extension XFree86-DGA > (II) Loading extension DPMS > (II) Loading extension FontCache > (II) Loading extension TOG-CUP > (II) Loading extension Extended-Visual-Information > (II) Loading extension XVideo > (II) Loading extension XVideo-MotionCompensation > (II) LoadModule: "pex5" > (II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a > (II) Module pex5: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension X3D-PEX > (II) LoadModule: "record" > (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a > (II) Module record: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.13.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension RECORD > (II) LoadModule: "xie" > (II) Loading /usr/X11R6/lib/modules/extensions/libxie.a > (II) Module xie: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension XIE > (II) LoadModule: "bitmap" > (II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Loading font Bitmap > (II) LoadModule: "freetype" > (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a > (II) Module freetype: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.1.9 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.2 > (II) Loading font FreeType > (II) LoadModule: "speedo" > (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a > (II) Module speedo: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.2 > (II) Loading font Speedo > (II) LoadModule: "type1" > (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a > (II) Module type1: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.2 > (II) Loading font Type1 > (II) Loading font CID > (II) LoadModule: "vbe" > (II) Loading /usr/X11R6/lib/modules/libvbe.a > (II) Module vbe: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.4 > (II) LoadModule: "int10" > (II) Loading /usr/X11R6/lib/modules/linux/libint10.a > (II) Module int10: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.4 > (II) LoadModule: "chips" > (II) Loading /usr/X11R6/lib/modules/drivers/chips_drv.o > (II) Module chips: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > Module class: XFree86 Video Driver > ABI class: XFree86 Video Driver, version 0.4 > (II) LoadModule: "mouse" > (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o > (II) Module mouse: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > Module class: XFree86 XInput Driver > ABI class: XFree86 XInput driver, version 0.2 > (II) CHIPS: Driver for Chips and Technologies chipsets: ct65520, ct65525, > ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, > ct65554, ct65555, ct68554, ct69000, ct69030, ct64200, ct64300 > (II) Primary Device is: PCI 00:04:0 > (--) Assigning device section with no busID to primary device > (--) Chipset ct65554 found > (II) resource ranges after xf86ClaimFixedResources() call: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xfe000000 - 0xfeffffff (0x1000000) MX[B](B) > [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) resource ranges after probing: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xfe000000 - 0xfeffffff (0x1000000) MX[B](B) > [6] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] > [7] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] > [8] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] > [9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [11] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] > [12] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] > (II) Setting vga for screen 0. > (II) Loading sub module "vgahw" > (II) LoadModule: "vgahw" > (II) Loading /usr/X11R6/lib/modules/libvgahw.a > (II) Module vgahw: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.4 > (II) Loading sub module "vbe" > (II) LoadModule: "vbe" > (II) Reloading /usr/X11R6/lib/modules/libvbe.a > (II) Loading sub module "int10" > (II) LoadModule: "int10" > (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a > (II) CHIPS(0): initializing int10 > (II) CHIPS(0): Primary V_BIOS segment is: 0xe400 > (II) CHIPS(0): VESA BIOS detected > (II) CHIPS(0): VESA VBE Version 2.0 > (II) CHIPS(0): VESA VBE Total Mem: 2048 kB > (II) CHIPS(0): VESA VBE OEM: CHIPS 65554 Super VGA > (II) CHIPS(0): VESA VBE OEM Software Rev: 1.0 > (II) CHIPS(0): VESA VBE OEM Vendor: Chips & Technologies, Inc. > (II) CHIPS(0): VESA VBE OEM Product: 65554 Display Controller > (II) CHIPS(0): VESA VBE OEM Product Rev: 2 > (**) CHIPS(0): Depth 16, (--) framebuffer bpp 16 > (==) CHIPS(0): RGB weight 565 > (==) CHIPS(0): Default visual is TrueColor > (==) CHIPS(0): Using gamma correction (1.0, 1.0, 1.0) > (==) CHIPS(0): Using HW cursor > (**) CHIPS(0): Enabling linear addressing > (--) CHIPS(0): base address is set at 0xFE000000. > (**) CHIPS(0): Using MMIO > (--) CHIPS(0): VideoRAM: 2048 kByte > (--) CHIPS(0): TFT probed > (--) CHIPS(0): LCD > (--) CHIPS(0): Display Size: x=800; y=600 > (--) CHIPS(0): PCI Bus > (--) CHIPS(0): Internal DAC disabled > (--) CHIPS(0): Using programmable clocks > (--) CHIPS(0): Dot clock 0: 25.172 MHz > (--) CHIPS(0): Dot clock 1: 28.325 MHz CRTclk > (--) CHIPS(0): Dot clock 2: 40.090 MHz FPclk > (--) CHIPS(0): Probed memory clock of 40.090 MHz > (==) CHIPS(0): Min pixel clock is 11.000 MHz > (--) CHIPS(0): Max pixel clock is 56.125 MHz > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Reloading /usr/X11R6/lib/modules/libddc.a > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Reloading /usr/X11R6/lib/modules/libddc.a > (II) CHIPS(0): VESA VBE DDC supported > (II) CHIPS(0): VESA VBE DDC Level 2 > (II) CHIPS(0): VESA VBE DDC transfer in appr. 1 sec. > (II) CHIPS(0): VESA VBE DDC read successfully > (II) CHIPS(0): Manufacturer: TOS Model: 5081 Serial#: 0 > (II) CHIPS(0): Year: 1995 Week: 20 > (II) CHIPS(0): EDID Version: 1.0 > (II) CHIPS(0): Digital Display Input > (II) CHIPS(0): Max H-Image Size [cm]: horiz.: 23 vert.: 17 > (II) CHIPS(0): Gamma: 1.00 > (II) CHIPS(0): No DPMS capabilities specified; RGB/Color Display > (II) CHIPS(0): redX: 0.000 redY: 0.000 greenX: 0.000 greenY: 0.000 > (II) CHIPS(0): blueX: 0.000 blueY: 0.000 whiteX: 0.000 whiteY: 0.000 > (II) CHIPS(0): Supported VESA Video Modes: > (II) CHIPS(0): [EMAIL PROTECTED] > (II) CHIPS(0): [EMAIL PROTECTED] > (II) CHIPS(0): [EMAIL PROTECTED] > (II) CHIPS(0): Manufacturer's mask: 0 > (II) CHIPS(0): Generic Monitor: Using hsync range of 29.00-61.00 kHz > (II) CHIPS(0): Generic Monitor: Using vrefresh range of 40.00-85.00 Hz > (II) CHIPS(0): Clock range: 11.00 to 56.12 MHz > (II) CHIPS(0): Not using default mode "800x600" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1024x768" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1024x768" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1024x768" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1024x768" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1024x768" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1152x864" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1280x960" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1280x960" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1280x1024" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1280x1024" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1280x1024" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1792x1344" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1792x1344" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1856x1392" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1856x1392" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1920x1440" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1920x1440" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1400x1050" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1400x1050" (insufficient memory for > mode) > (--) CHIPS(0): Virtual size is 800x600 (pitch 800) > (**) CHIPS(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz > (II) CHIPS(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 > +hsync +vsync > (**) CHIPS(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz > (II) CHIPS(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 > -hsync -vsync > (++) CHIPS(0): DPI set to (100, 100) > (II) Loading sub module "fb" > (II) LoadModule: "fb" > (II) Loading /usr/X11R6/lib/modules/libfb.a > (II) Module fb: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > ABI class: XFree86 ANSI C Emulation, version 0.1 > (II) Loading sub module "xaa" > (II) LoadModule: "xaa" > (II) Loading /usr/X11R6/lib/modules/libxaa.a > (II) Module xaa: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.4 > (II) Loading sub module "ramdac" > (II) LoadModule: "ramdac" > (II) Loading /usr/X11R6/lib/modules/libramdac.a > (II) Module ramdac: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.4 > (II) do I need RAC? No, I don't. > (II) resource ranges after preInit: > [0] 0 0 0xfe000000 - 0xfeffffff (0x1000000) MS[B] > [1] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [6] -1 0 0xfe000000 - 0xfeffffff (0x1000000) MX[B](B) > [7] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) > [8] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) > [9] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) > [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [12] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] > [13] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] > > Fatal server error: > Caught signal 11. Server aborting > > > When reporting a problem related to a server crash, please send > the full server output, not just the last messages. > This can be found in the log file "/var/log/XFree86.0.log". > Please report problems to [EMAIL PROTECTED] > >
