Subject: parport driver problems
Date: Tue, Aug 28, 2001 at 10:24:06PM +0530
In reply to:[EMAIL PROTECTED]
Quoting [EMAIL PROTECTED]([EMAIL PROTECTED]):
> I am having an error with my parport driver :
>
> Starting lpd : parport0 : detected irq 7 ; use procfs to enable
> interrupt
> driven operation .
>
> This is what dmesg has to say :
> .
> .
>
> parport0 : PC - style at 0x378(0x778) [SSp,ECP,ECPP52]
> parport0 : detected irq7;use procfs to enable interrupt driven operation.
> parport-probe: failed
> parport0:no IEEE-1284 device present
> lp0 : using parport0 (polling)
You might try adding the following to your lilo.conf append line.
append = "lp=parport0 parport=0x378,none"
then rerun lilo and reboot.
:-) HTH, YMMV, HAND :-)
--
RAM disk is NOT an installation procedure.
_______________________________________________________
