On Sun, Mar 09, 2003 at 04:58:39PM -0600, Joseph A Nagy Jr wrote:
I have a modem and a NIC. The modem is a PCI WinModem (forget brand atm), the NIC is a LinkSys Fast Ethernet 10/100 Network Anywhere, model number NC100U. I know it works as I was able to use it under RedHat. I cannot for the life me figure out what packages to install (other then dhcp, which is installed and running) to try and connect to the net via my router (also a LinkSys product).
the wisdom of the archives says ftp://ftp.scyld.com/pub/network/tulip.c
Thank you.
works fine with the above linksys nic. Before you try that i would try #modprobe tulip
#modprobe tulip Linux Tulip driver version 0.9.15-pre9 (Nove 6, 2001) PCI: Found IRQ 10 for device 00:09.0 eth0: ADMteck Comet rev 17 at 0x6000, 00:04:5A:00:06:A7, IRQ 10.
and see if the tulip driver for your currently running kernel works.
I'll say yes.
google is good!
Thanks. Now I have a place to start. :)
hugh
-- Let me meddle not in the affairs of Linuxen For I am an idiot and will toast my boxen.
http://www.hsv-hotspots.com/ Your hotspot for Wireless in HSV, AL
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
