The rcX.d directories are the run level directories. The rc2.d is the Debian default at boot. If you haven't changed anything since your install, then when you boot Debian is using rc2.d. I am not familiar with rp-pppoe, and I have not looked at my rc2.d since I worked with xdm,but: The SXX<daemon (or program)> is initiation schedule. If you look at the SXX numbers they are sequential. i.e. S99xdm starts xdm later in the sequence. If rp-pppoe needs pppd to run, then add 1 the the ppp SXX value and it will put itself right after ppp at initiation. If it replaces pppd then remove SXXppp and use the SXX value for ppp ----- Original Message ----- From: "Bodnyk, Bruce W" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Thursday, April 04, 2002 4:42 PM Subject: Starting pppoe
I installed rp-pppoe and it works like a champ. The documentation states to have it start at boot time that a line should be added to the end of /etc/rc.d/rc.local. Well my GNU/Linux installation doesn't have an rc.d directory; just a bunch of directories named rc0.d, rc1.d, rc2.d, etc. I'm assuming the scripts in these directories run as the system is passing through the various boot states. So do I simply copy the adsl-start script to one of these directories and proceed the name with Sxx? If so, which is the correct rcx.d to put it in and what do I number it? Thanks! Bruce Bruce W. Bodnyk Staff Engineer, CAE Development FCI Electronics 825 Old Trail Road Etters, PA 17319-9351 Phone: (717) 938-7543 Fax: (717) 938-7224 E-Mail: [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
