I've managed to enable software raid on one of my systems. Four different arrays built as follows:
/dev/md0: (/boot) - /dev/hda1 & /dev/hdc1 /dev/md1: (/var/log) - /dev/hda6 & /dev/hdc6 /dev/md2: (/) - /dev/hda7 & /dev/hdc7 /dev/md3: (/opt/backup) - /dev/hda8 & /dev/hdc8 Three of the four come up perfectly after reboot (md0, md1, & md3). The problem is with md2. After every reboot it's degraded with only hdc7 as a member. I can manually re-add hda7 and it syncs without error and works fine until the next reboot. But I'd like to correct this so this isn't necessary. I'm using grub as my boot loader and the following is the entry being loaded on startup: title Debian GNU/Linux, kernel 2.6.11-1-386 root (hd0,0) kernel /vmlinuz-2.6.11-1-386 root=/dev/md2 ro initrd /initrd.img-2.6.11-1-386 savedefault boot The system is running sarge, with the exception of the kernel. I'd be happy to provide any further information that may be helpful. -- Jamin W. Collins This is the typical unix way of doing things: you string together lots of very specific tools to accomplish larger tasks. -- Vineet Kumar -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
