Hello, I'm testing a server before I put it in production, and I've got a problem with mdraid.
The config: - Dell PowerEdge 800 - 4 x 250 Go SATA attached to the mobo - /boot 4 x 1 GB (1 GB available)in RAID1, 3 active + 1 spare - / 4 x 250 GB (500 GB available) in RAID5, 3 active + 1 spare No problems at install, and the server runs OK. Then I stop the server and remove /dev/sdb to simulate a hard disk failure that has caused a crash and a reboot. With the second disk removed the disks names are changed, the 3rd disk /dev/sdc becomes /dev/sdb and the 4th disk (that was the spare disk) /dev/sdd becomes /dev/sdc. During the boot process md detects that there is a problem, but then complains it can't find the /dev/sdd spare disk and the boot process stops with a kernel panic error. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
