On Tuesday 13 September 2005 03:17 pm, Joseph H. Fry wrote: > Chris Parker wrote: > >On Tuesday 13 September 2005 01:36 pm, Joseph H. Fry wrote: > >>Chris Parker wrote: > >>>First off - kern = 2.6.8-2-i686 > >>>Package: xserver-xfree86 > >>>Status: install ok installed > >>>Priority: optional > >>>Section: x11 > >>>Installed-Size: 15616 > >>>Maintainer: Debian X Strike Force <[email protected]> > >>>Architecture: i386 > >>>Source: xfree86 > >>>Version: 4.3.0.dfsg.1-14 > >>>-------------------------------------- > >>>gnome resolution set at 800x600 will not go to 1024x768 > >>> > >>># XF86Config-4 (XFree86 X Window System server configuration > >>>file) # > >>># This file was generated by dexconf, the Debian X Configuration > >>>tool, using > >>># values from the debconf database. > >>># > >>># Edit this file with caution, and see the XF86Config-4 manual > >>>page. # (Type "man XF86Config-4" at the shell prompt.) > >>># > >>># This file is automatically updated on xserver-xfree86 package > >>>upgrades *only* > >>># if it has not been modified since the last upgrade of the > >>>xserver-xfree86 > >>># package. > >>># > >>># If you have edited this file but would like it to be > >>>automatically updated > >>># again, run the following commands as root: > >>># > >>># cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom > >>># md5sum /etc/X11/XF86Config-4 > >>> > >>>>/var/lib/xfree86/XF86Config-4.md5sum # dpkg-reconfigure > >>> > >>>xserver-xfree86 > >>> > >>>Section "Files" > >>> FontPath "unix/:7100" # local > >>>font server > >>> # if the local font server has problems, we can fall back > >>>on these > >>> FontPath "/usr/lib/X11/fonts/misc" > >>> FontPath "/usr/lib/X11/fonts/cyrillic" > >>> FontPath "/usr/lib/X11/fonts/100dpi/:unscaled" > >>> FontPath "/usr/lib/X11/fonts/75dpi/:unscaled" > >>> FontPath "/usr/lib/X11/fonts/Type1" > >>> FontPath "/usr/lib/X11/fonts/CID" > >>> FontPath "/usr/lib/X11/fonts/Speedo" > >>> FontPath "/usr/lib/X11/fonts/100dpi" > >>> FontPath "/usr/lib/X11/fonts/75dpi" > >>>EndSection > >>> > >>>Section "Module" > >>> Load "GLcore" > >>> Load "bitmap" > >>> Load "dbe" > >>> Load "ddc" > >>> Load "dri" > >>> Load "extmod" > >>> Load "freetype" > >>> Load "glx" > >>> Load "int10" > >>> Load "record" > >>> Load "speedo" > >>> Load "type1" > >>> Load "vbe" > >>>EndSection > >>> > >>>Section "InputDevice" > >>> Identifier "Generic Keyboard" > >>> Driver "keyboard" > >>> Option "CoreKeyboard" > >>> Option "XkbRules" "xfree86" > >>> Option "XkbModel" "pc104" > >>> Option "XkbLayout" "us" > >>>EndSection > >>> > >>>Section "InputDevice" > >>> Identifier "Configured Mouse" > >>> Driver "mouse" > >>> Option "CorePointer" > >>> Option "Device" "/dev/psaux" > >>> Option "Protocol" "ImPS/2" > >>> Option "Emulate3Buttons" "true" > >>> Option "ZAxisMapping" "4 5" > >>>EndSection > >>> > >>>Section "Device" > >>> Identifier "Generic Video Card" > >>> Driver "vesa" > >>> BusID "PCI:0:2:0" > >>># VideoRam 16384 > >>>EndSection > >>> > >>>Section "Monitor" > >>> Identifier "MX70" > >>> HorizSync 30-70 > >>> VertRefresh 47-120 > >>> Option "DPMS" > >>>EndSection > >>> > >>>Section "Screen" > >>> Identifier "Default Screen" > >>> Device "Generic Video Card" > >>> Monitor "MX70" > >>> DefaultDepth 24 > >>> SubSection "Display" > >>> Depth 1 > >>> Modes "1024X768" "800x600" "640x480" > >>> EndSubSection > >>> SubSection "Display" > >>> Depth 4 > >>> Modes "1024X768" "800x600" "640x480" > >>> EndSubSection > >>> SubSection "Display" > >>> Depth 8 > >>> Modes "1024X768" "800x600" "640x480" > >>> EndSubSection > >>> SubSection "Display" > >>> Depth 15 > >>> Modes "1024X768" "800x600" "640x480" > >>> EndSubSection > >>> SubSection "Display" > >>> Depth 16 > >>> Modes "1024X768" "800x600" "640x480" > >>> EndSubSection > >>> SubSection "Display" > >>> Depth 24 > >>> Modes "1024X768" "800x600" "640x480" > >>> EndSubSection > >>>EndSection > >>> > >>>Section "ServerLayout" > >>> Identifier "Default Layout" > >>> Screen "Default Screen" > >>> InputDevice "Generic Keyboard" > >>> InputDevice "Configured Mouse" > >>>EndSection > >>> > >>>#Section "DRI" > >>># Mode 0666 > >>>#EndSection > >>>---------------------------------------------------------------- > >>>-- ----- > >>> > >>>where is setting to change resolution ?? > >>> > >>>thanks > >> > >>Try removing the "DPMS" option on your monitor... otherwise your > >>config is correct to default to 1024x768 > > > >tried that -still doesnt work. here is a lspci list. > > > >0000:00:02.0 VGA compatible controller: Intel Corp. > >82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev > > 01) (prog-if 00 [VGA]) > > Subsystem: Asustek Computer, Inc.: Unknown device 8093 > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- > > VGASnoop- ParErr- Stepping- SERR- FastB2B- > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast > > >TAbort- <TAbort- <MAbort- >SERR- <PERR- > > Latency: 0 > > Interrupt: pin A routed to IRQ 177 > > Region 0: Memory at e8000000 (32-bit, prefetchable) > >[size=128M] > > Region 1: Memory at e7800000 (32-bit, non-prefetchable) > >[size=512K] > > Capabilities: <available only to root> > > > >--------------------------------------------------------------- > >would the i810 driver be better than vesa? > >also if i ctrl+alt+f? out of X when I try to go back all there is > > is a blank screen? > >in kinfo- shows the xserver in a 800x600 default res. where does > > it source this info? > > > >thanks again > > I'd give that driver a shot, certainly can't hurt to try... it's > what I'm using. I'm no expert, so perhaps someone with more > experience can chime in here! > > Good Luck
I'll try it. fwi hp pavillion 523w w/hp mx70 monitor. If i need to post more info let me know. thanks -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
