Hi,
When I shutdown (or halt) on the console I get the message:
Can't deactivate volume group "vg00" with 1 open
logical volume(s)
Which seems reasonable because my root partition is a
logical volume, but I'm new to LVM2 and figure
it's better to ask now than suffer wierd data
corruption later.
Is this message normal? Do I have a problem?
Here's more detail:
Debian sarge. Fresh install. Linux 2.6 kernel.
(2.8.8-2-686)
/dev/hda 300GB WD ATA drive. Only disk.
/dev/hda1 400MB /boot
/dev/hda2 299.6GB Extended partition
/dev/hda5 299.6GB Linux LVM
/dev/vg00 volume group with all of /dev/hda5
/dev/vg00/swap 400MB swap
/dev/vg00/root 5GB /
remainder of vg unused
All file systems ext3.
Drive: WDC WD3000JB-00KFA0
(Gnasty WD drive has all jumpers removed
to be lone master.)
System:
400MHz Celeron
IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
Thanks.
Karl <[EMAIL PROTECTED]>
Free Software: "You don't pay back, you pay forward."
-- Robert A. Heinlein
P.S. I posted this to the [EMAIL PROTECTED] list
but got no reply, there seems to be hardly
any traffic at all there, so figured I'd try here.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
