my card has 'B4' on the back. rest inline.
thanks, tom arnall north spit, ca > > Looks like whether or not there's a working Linux > driver for your wireless card depends on the hardware > revision of your particular card. For your card there > appear to be 3 revisions and only 1 (C1) is reported > to have a working native Linux driver. Check out this > link to help you figure out which revision you have: > http://support.dlink.com/products/DWLG650.asp > > If you are lucky and have the C1 revision, use the > MadWiFi Linux driver. If not, try the Prism or Madwifi > drivers and if you can't get them to work, i downloaded the host ap driver for the Prism chipset and tried to compile it. the compile was unsuccessful. the error messages are excerpted here: . . . from include/linux/module.h:10, from /home/kloro/linux/hostap-driver-0.4.7/driver/modules/hostap.c:21: include/asm/processor.h:87: error: array type has incomplete element type In file included from include/linux/netdevice.h:151, from include/linux/if_arp.h:26, . . . make[2]: *** [/home/kloro/linux/hostap-driver-0.4.7/driver/modules/hostap.o] Error 1 make[1]: *** [_module_/home/kloro/linux/hostap-driver-0.4.7/driver/modules] Error 2 make[1]: Leaving directory `/usr/src/kernel-headers-2.6.8-2-386' make: *** [2.6] Error 2 fall back > to the ndiswrapper approach -- but if at all possible > use a native Linux driver. > > Once you've figured out if you have the C1 revision or > not, post back here if you need help with getting the > driver included in the kernel and other setup, or if > you need help with ndiswrapper. > > HTH > > Mark - -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]