Hi, My newly bought Kaser USB Jumbo Drive [1] can't be recognized. I've been googling around, and here are the relevant info.
After the USB drive is plugged in: $ tail messages Dec 29 19:40:31 cxmr kernel: usb 1-5: new high speed USB device using ehci_hcd and address 8 Dec 29 19:40:32 cxmr kernel: usb 1-5: new high speed USB device using ehci_hcd and address 9 Dec 29 19:40:32 cxmr kernel: usb 1-5: new high speed USB device using ehci_hcd and address 10 Dec 29 19:40:33 cxmr kernel: usb 1-5: new high speed USB device using ehci_hcd and address 11 $ dmesg usb 1-5: new high speed USB device using ehci_hcd and address 8 usb 1-5: device descriptor read/64, error -71 usb 1-5: device descriptor read/64, error -71 usb 1-5: new high speed USB device using ehci_hcd and address 9 usb 1-5: device descriptor read/64, error -71 usb 1-5: device descriptor read/64, error -71 usb 1-5: new high speed USB device using ehci_hcd and address 10 usb 1-5: device not accepting address 10, error -71 usb 1-5: new high speed USB device using ehci_hcd and address 11 usb 1-5: device not accepting address 11, error -71 Further, the 'udevmonitor' didn't report anything, whether the drive is plugged in or unplugged. Is there anything else I can check/do? Thanks [1] It says Kaser USB 2.0 4GB Flash Drive on the package, but it's actually a miniature disk drive. Jumbo Drive V2 4GB Yofun060V1-4G http://www.kasercorp.com/index.asp?PageAction=VIEWPROD&ProdID=31 -- Tong (remove underscore(s) to reply) http://xpt.sourceforge.net/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]