Unstable running the latest unstable devfs. Just downloaded kernel-source-2.4.21 and qce-source.
Built the kernel with make-kpkg and got two deb files: kernel-image-2.4.21_10.00.Custom_i386.deb and qce-modules-2.4.21_0.40d-2+2.4.21+10.00.Custom_i386.deb. Installed - rebooted. lsmod shows: Module Size Used by Not tainted apm 10060 2 (autoclean) mod_quickcam 38096 0 (unused) videodev 6144 1 [mod_quickcam] keybdev 2116 0 (unused) usbkbd 3640 0 (unused) input 3488 0 [keybdev usbkbd] usb-uhci 23696 0 (unused) usbcore 63340 1 [mod_quickcam usbkbd usb-uhci] So - videodev is loaded and used by quickcam. The camera is detected at boot: kernel: uhci.c: USB Universal Host Controller Interface driver v1.1 kernel: Linux video capture interface: v1.00 kernel: usb.c: registered new driver quickcam kernel: USB Quickcam Class ff SubClass ff idVendor 46d idProduct 870 kernel: USB Quickcam camera found using: $Id: quickcam.c,v 1.111 2003/01/27 09:41:03 tuukkat Exp $ kernel: quickcam: probe of HDCS1000 sensor = 10 02 id: 08 kernel: quickcam: probe of BP100 sensor = 00 10 id: 64 kernel: quickcam: probe of VV6410 sensor = 00 10 id: 19 kernel: quickcam: probe of HDCS1020 sensor = 10 10 id: 10 kernel: quickcam: HDCS1020 sensor detected Here's the options I used in the kernel build. # # Video For Linux # CONFIG_VIDEO_PROC_FS=y CONFIG_I2C_PARPORT=m # # Video Adapters # CONFIG_VIDEO_BT848=m CONFIG_VIDEO_PMS=m CONFIG_VIDEO_BWQCAM=m CONFIG_VIDEO_CQCAM=m CONFIG_VIDEO_W9966=m CONFIG_VIDEO_CPIA=m CONFIG_VIDEO_CPIA_PP=m CONFIG_VIDEO_CPIA_USB=m CONFIG_VIDEO_SAA5249=m CONFIG_TUNER_3036=m CONFIG_VIDEO_STRADIS=m CONFIG_VIDEO_ZORAN=m CONFIG_VIDEO_ZORAN_BUZ=m CONFIG_VIDEO_ZORAN_DC10=m CONFIG_VIDEO_ZORAN_LML33=m CONFIG_VIDEO_ZR36120=m # CONFIG_VIDEO_MEYE is not set Now - I did this a long while ago (on testing) and IIRC I did the same things - but that time I got a /dev/video0 etc. This time I have nothing /dev/vid* So - where did I screw up or what is the device called now? I need to use this with camserv. Any hints appreciated -- Chris Searle -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
