On Fri, Sep 07, 2007 at 05:34:13PM -0500, Mumia W.. wrote: > On 09/07/2007 03:19 PM, Thomas H. George wrote: >> I have an Etch box with a linux-image-2.6.18-5-k7. All works well but >> wodim -devices >> Beginning native device scan. This may take a while ... >> wodim: Invalid argument. Cannot Set SG_SET_TIMEOUT >> Apt-get install wodim confirms I have the latest release. I have also run >> apt-get dist-upgrade but still get the same result from wodim -devices. >> What's wrong? >> Tom George > > What is the output of wodim -scanbus ?
Cannot open SCSI driver > > What device does your CD-ROM/DVD normally use? > /dev/hdc > Is your optical drive accessed through the normal ATAPI driver or through > ide-scsi (SCSI emulation for IDE devices)? In lsmod I find ide_cd and cdrom uses ide_cd > > Is SCSI compiled into your kernel--at least as a module? If so, is that > module loaded? I think that the 'sg' (SCSI general?) module is used by > wodim. I am using a linux-image-2.6.18 kernel. Apparently it was not compiled with SCSI emulation as this should not be needed. > -------------------- > I'm running Sarge with kernel 2.6.22 and wodim (self compiled) 1.1.6. Even > though 2.6 kernels support writing to ATAPI optical drives, I'm still using > ide-scsi to drive my CD writer. > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a > subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
