Hi all, My Debian box has been running for several months now. It has two 8139 based Ethernet cards. Both were previously being successfully detected by Debian and used.
I upgraded to the latest Stable when it came out, and I'm not sure I've rebooted since then. Today I had to shut the box down and restart it several hours later due to electricity work in the area. When the box came back up it is no longer detecting the second network card. If I boot from the 2.2 kernel on the install CD for 3.0r1, it detects both cards. If I boot from the bf24 option on that same CD, it only detects one card. lspci is only showing one card under Debian (apologies for the long lines): 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 651 Host (rev 02) 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS962 [MuTIOL Media IO] (rev 14) 00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] 00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0) 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) 00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) 00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) 00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller 00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 00:10.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46) 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 65x/M650/740 PCI/AGP VGA Display Adapter Has anyone got any ideas why the module is no longer detecting the second card? Why isn't it showing in lspci? Could some module parameter be required to tell the module that there are two cards, that has somehow been 'lost' during the upgrade to the latest stable? Thanks in advance for any help and advice you can offer. Cheers Andy -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
