On 04/03/2008, Carlos Parada <[EMAIL PROTECTED]> wrote: > Well, I am registered in Compiz forums and I posted a thread with my > problems installing Compiz but I didnt receive too much help. > > I think I've tried everything in an atempt to configure my graphics card for > running Compiz Fusion and I'm really going nuts with this issue, everytime I > try something new (based on tutorials or forum posts from the web) I always > get that freaking white screen... with Beryl too.
Looking through my notes, I see that acpi-support was problematic with Compiz also. Here are my two relevant files: [EMAIL PROTECTED]:~$ cat /etc/X11/xorg.conf # Xorg configuration created by system-config-display Section "ServerLayout" Identifier "single head configuration" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Synaptics" "CorePointer" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Synaptics" Driver "synaptics" Option "Device" "/dev/input/mice" Option "Protocol" "auto-dev" Option "Emulate3Buttons" "yes" Option "SHMConfig" "on" EndSection Section "Monitor" ### Comment all HorizSync and VertSync values to use DDC: ### Comment all HorizSync and VertSync values to use DDC: Identifier "Monitor0" ModelName "LCD Panel 1680x1050" ### Comment all HorizSync and VertSync values to use DDC: HorizSync 31.5 - 90.0 VertRefresh 59.9 - 60.1 Option "dpms" EndSection Section "Device" Identifier "Videocard0" Driver "fglrx" EndSection Section "Module" load "GLcore" load "glx" load "dri" EndSection Section "DRI" Group 0 Mode 0666 EndSection Section "Extensions" Option "Composite" "Disable" # Option "Composite" "Enable" # Option "Composite" "1" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1680x1050" EndSubSection EndSection [EMAIL PROTECTED]:~$ cat /etc/default/acpi-support # Comment the next line to disable ACPI suspend to RAM ACPI_SLEEP=true # Comment the next line to disable suspend to disk ACPI_HIBERNATE=true # Change the following to "standby" to use ACPI S1 sleep, rather than S3. # This will save less power, but may work on more machines ACPI_SLEEP_MODE=mem # Add modules to this list to have them removed before suspend and reloaded # on resume. An example would be MODULES="em8300 yenta_socket" # # Note that network cards and USB controllers will automatically be unloaded # unless they're listed in MODULES_WHITELIST MODULES="" # Add modules to this list to leave them in the kernel over suspend/resume MODULES_WHITELIST="fglrx" # Should we save and restore state using the VESA BIOS Extensions? SAVE_VBE_STATE=false # The file that we use to save the vbestate VBESTATE=/var/lib/acpi-support/vbestate # Should we attempt to warm-boot the video hardware on resume? POST_VIDEO=false # Save and restore video state? # SAVE_VIDEO_PCI_STATE=true # Should we switch the screen off with DPMS on suspend? USE_DPMS=true # Use Radeontool to switch the screen off? Seems to be needed on some machines # RADEON_LIGHT=true # Uncomment the next line to switch away from X and back again after resume. # This is needed for some hardware, but should be unnecessary on most. DOUBLE_CONSOLE_SWITCH=true # Set the following to "platform" if you want to use ACPI to shut down # your machine on hibernation HIBERNATE_MODE=shutdown # Comment this out to disable screen locking on resume LOCK_SCREEN=true # Uncomment this line to have DMA disabled before suspend and reenabled # afterwards # DISABLE_DMA=true # Uncomment this line to attempt to reset the drive on resume. This seems # to be needed for some Sonys # RESET_DRIVE=true # Add services to this list to stop them before suspend and restart them in # the resume process. STOP_SERVICES="mysql " # Restart Infra Red services on resume - off by default as it crashes some # machines RESTART_IRDA=false # Switch to laptop-mode on battery power - off by default as it causes odd # hangs on some machines [EMAIL PROTECTED]:~$ Dotan Cohen http://what-is-what.com http://gibberish.co.il א-ב-ג-ד-ה-ו-ז-ח-ט-י-ך-כ-ל-ם-מ-ן-נ-ס-ע-ף-פ-ץ-צ-ק-ר-ש-ת A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing?