On Sun, Nov 16, 2008 at 00:14:11 -0500, H.S. wrote: > Hello, > > Running Debian Testing, if I plug in a pair of USB headphones (which are > detected fine), how do I tell me KDE session (ver 3.5.9) to use that > device as default audio output device instead of the speaker connected > to the audio card output? > > The USB headset is detected as Microsoft LX3000: > $> aplay -l > **** List of PLAYBACK Hardware Devices **** > card 0: AudioPCI [Ensoniq AudioPCI], device 0: ES1371/1 [ES1371 DAC2/ADC] > Subdevices: 0/1 > Subdevice #0: subdevice #0 > card 0: AudioPCI [Ensoniq AudioPCI], device 1: ES1371/2 [ES1371 DAC1] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > card 1: default [Microsoft LifeChat LX-3000 ], device 0: USB Audio [USB > Audio] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > > > I can change its volume using 'alsamixer -c 1' command, or use it as > output for mplayer using -ao option. But I am not able to tell KDE > session to select the new device as the output device. Any ideas?
The KDE audio device can be set in Control Center > Sound & Multimedia > Sound System > Hardware > Override device location. The device location "hw:1,0" (without the quotes) should give you output through the USB headphones for the ALSA configuration that you posted. (This device location points to "hardware: card 1, device 0".) You have to commit the change with the "Apply" button at the bottom, then you can go to the "General" tab and try the "Test Sound" button. If you want to have automatic switching between the USB output and the normal output whenever you plug or unplug the headphones, then you have to arrange that at the ALSA level: http://alsa.opensrc.org/index.php/Hotplugging_USB_audio_devices_(Howto) (KDE should always use the ALSA default device if "override device location" is inactive.) -- Regards, | http://users.icfo.es/Florian.Kulzer Florian | -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
