Hi chaps,
Just upgraded an etch machine to lenny, and with it I've gone from the 2.6.18-6
kernel up to 2.6.26-1 kernel.
I'm seeing the following errors under heavy disk activity:
Jun 18 18:08:05 xglyn2 kernel: [14214.048193] ide: failed opcode was: unknown
Jun 18 18:08:11 xglyn2 kernel: [14220.846157] hdc: dma_intr: status=0x51 {
DriveReady SeekComplete Error }
Jun 18 18:08:11 xglyn2 kernel: [14220.846157] hdc: dma_intr: error=0x40 {
UncorrectableError }, LBAsect=26482377, sector=26482370
Previous to using 2.6.26-1 I did try 2.6.26-2 (both 686) and that gave me tons
of these errors upon boot up. I thought going back to the 2.6.26-1 version had
resolved the issue but it's obviously just less severe.
Anyone seen similar or got any ideas?
btw, the heavy disk activity is loading 80GB postgres database - I've switched
back to 2.6.18 to try this again but I suspect it'll be fine.
Glyn
--
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]
