Adrián Ribao Martínez put forth on 6/7/2010 7:10 AM: > Thank you very much Javier, > > We don't need virtualization in the server, I suppose it's the same and > everything works ok. > > Do you have a RAID controller in the system?
According to this: https://sp.ts.fujitsu.com/dmsp/docs/ds_prim-rx300_s4.pdf Fujitsu uses the LSI MegaRAID series controllers, all of which are supported by the standard Linux kernel either by megaraid.c or megaraid_sas.c. The Broadcom BCM5708 GigE chip is supported by the standard Linux kernel. IPMI, I2C, etc are supported by Linux, and Debian. Some of these will probably require manual setup/configuration--it won't be done automatically during Debian install. If _you_ know Debian, and Linux in general, you shouldn't have a problem running it on this server. It appears all the subsystem components are industry standard fare supported by Linux. Again, you may have to install/configure some of the user space tools manually. -- Stan -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
