On Wed, June 16, 2010 13:13, Siju George wrote: > Hope some one finds this helpful :-) > > --Siju > > Rebuilding RAID 1 Array in Linux with a new hard disk after a disk fault. > ========================================================================= >
Thanks, this might prove useful. However I do have a question... which might be just as important. How to identify which drive has failed in an array? I have 6 disks, 4 are used in raid (mdadm), the other 2 contain /boot, / and /home. /dev/sdc /dev/sdd /dev/sde /dev/sdf Each have 1 partition. /dev/md0 (raid 1) consists of /dev/sdc1 and /dev/sdd1 /dev/md1 (raid 1) consists of /dev/sde1 and /dev/sdf1 If a drive fails, how do I know which drive? This is a desktop system, not a server. -- Rarely do people communicate; they just take turns talking. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/23452.91.183.48.98.1276695172.squir...@stevenleeuw.kwik.to
