On Wed, Jul 6, 2011 at 10:14 AM, S Scharf <ss11...@gmail.com> wrote:
> I am trying to configure a new computer with a ASUS PSH67-M EVO motherboard > and a AMD64 Wheezy net install. I have two issues: > > 1) using the Debian software RAID, I am trying to configure a RAID-1 on two > 1.5T disks, with LVM on the RAID partitions. > With this configuration, I get an error that grub cannot be installed to the > MBR. (I have tried both a MSDOS partition table, and a > GPT partition table with a grub-bios partition at the start of the disk. > > If I try an non-raid config (the default with using the entire disk), > everything works. What does the error say (if anything)? Can you switch to a console and run grub-install successfully there? > 2) The Motherboard has Intel Raid support. If I enable the motherboard Raid, > the installer does not see the raid disk. (for that matter neither does > my systemrescuecd, but a Ubuntu 11.4 live boot can see it). What do I have > to do to make this useable? I have absolutely *no* experience of dmraid but: - don't you have to create the volumes in the BIOS before booting d-i? - don't you have to switch to a console and modprobe one or more dmraid modules(s)? -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAOdo=sxouuzzypkmfbhtic73jbyhomrs-hyzfv82yw-fvdc...@mail.gmail.com