On Tue, 18 Oct 2011 15:14:39 +0200, Mariusz Sielicki wrote: > 2011/10/18 Ramon Hofer <[email protected]> > >> I tried setting up a Shuttle XS35GTV2 as an XBMC frontend following >> this guide: >> http://wiki.xbmc.org/?title=XBMCbuntu >> >> Unfortunately the (any) Ubuntu installer can't set up the NIC. The >> Debian installer has no problem so I went for Debian. Unfortunately >> installing xbmc standalone is a bit harder. >> >> I was able to install xorg, xbmc (from the multimedia repos) and the >> nvidia driver, created the xorg.conf, the xbmc user and could start >> xbmc with >> >> # xinit xbmc-standalone >> >> Now I'm trying to set up xbmc to start automatically on boot. I found >> this post >> http://wiki.xbmc.org/index.php?title=HOW-TO:Install_XBMC_for_Linux >> >> I changed the init.d script according to my paths. Here it is: >> http://pastebin.com/fQSJ4xJt >> >> When I now reboot XBMC tells me: >> "XBMC needs hardware accelerated OpenGL rendering. Install an >> appropriate graphics driver..." >> >> > It's message from /usr/share/xbmc/FEH.py script. If you are sure that > you have 3D accelaration, you can add "--no-test" to init script or > modify FEH.py script to omit that test.
Thanks for your reply! I deleted the test from the python script and now xbmc starts on boot. Unfortunately movies don't run smoothly. When I start a 720p movie and log in with ssh to check the system load with top, xbmc uses around 100% cpu. When I disable the init.d script, reboot, login and start xinit xbmc- standalone manually the same movie runs smoothly and uses only around 10% cpu power. -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
