I seem to have an issue as well and my cdn error Scottrocc roccVegas ent.Inc
> On Feb 13, 2014, at 9:21 AM, "Manikandan M" <[email protected]> wrote: > > Thanks Selim. I'll try it and let you know. > >> On Tue, Feb 11, 2014 at 5:11 PM, Selim T. Erdogan >> <[email protected]> wrote: >> Manikandan M, 8.02.2014: >> > >> > I'm having a HP laptop running wheezy. The built-in wireless adaptor wasn't >> > working fine. So bought a Asus usb-n10 wireless adaptor. installed the >> > drivers and it works fine. >> > But once i shutdown or restart my laptop, its not working. The lsusb >> > command shows the wireless adaptor, but the adaptor is not working (not >> > getting detected in network manager in gnome). only way to make it work is >> > to restart. >> > Has anyone faced a similar situation and is there any fix for this issue. >> > Thanks in advance. >> >> You could try removing and reloading the relevant kernel module, which >> might be r8712u, based on https://wiki.debian.org/rtl819x >> So, try "modprobe -r r8712u && modprobe r8712u" as root. >> >> I have to do this for a pci wifi adapter, when I start the laptop after >> hibernation. Actually, that reminds me: I also have a usb adapter which >> occasionally has the problem you have, though caused by the built-in pci >> adapter. It might be related to them both being part of the rt2x00 >> driver family. After waking up from hibernation, if the pci adapter >> --- using rt2500pci --- was in use before, I have to either reload or >> remove its module, to get the usb adapter --- using rt2800usb --- to work. >> But if I've removed the rt2500pci module, then the rt2800usb module >> will survive the hibernation. >> >> >> -- >> To UNSUBSCRIBE, email to [email protected] >> with a subject of "unsubscribe". Trouble? Contact [email protected] >> Archive: http://lists.debian.org/[email protected] >
