On Sb, 22 feb 14, 19:22:16, Markos wrote: > Hi all, > > > I'm trying to configure a machine with two network cards to share > Internet access to an internal network > > the /etc/network/interface is: > > # The loopback network interface > auto lo > iface lo inet loopback > > auto eth0 > iface eth0 inet static > address 192.168.0.1 > netmask 255.255.255.0 > > auto eth1 > iface eth1 inet dhcp > > The card eth0 is used as gateway on the internal network with static > IP 192.168.0.1 and eth1 is connected to the B-890 -53 Huawei modem. > > But the modem do not send an IP during initialization.
How did you check? I would recommend you try configuring eth1 with dhcp
"by hand":
dhclient eth1
This should give you feedback on what is actually happening. I assume
the physical connection is ok, right?
> The IP of modem is192.168.1.1.
>
> The modem sends the IP address (192.168.0.4) to my laptop by wifi
> without problems.
Are you sure about this? The modem should hand out IPs in its own subnet
(192.168.1.x) or do you mean 192.168.*1*.4?
Kind regards,
Andrei
--
http://wiki.debian.org/FAQsFromDebianUser
Offtopic discussions among Debian users and developers:
http://lists.alioth.debian.org/mailman/listinfo/d-community-offtopic
http://nuvreauspam.ro/gpg-transition.txt
signature.asc
Description: Digital signature
