On Sun, Mar 22, 2015 at 11:59:16AM -1000, Joel Roth wrote: > On Sat, Mar 21, 2015 at 01:05:58AM +0000, stefan.schwar...@gmx.net wrote: > > > I am using my laptop (lenovo T430, debian testing) > > regularly in a docking station. The dock has a USB > > keyboard, USB mouse and monitor permanently attached. The > > laptops suspends from time to time, and _after_ resuming > > X11 or some other system component the input from USB > > mouse and keyboard to be dropped/ignored partially. > > Symptoms are that the cursor does not move with the mouse, > > however it will start moving again if I click any of the > > mouse buttons; or that the keyboard input is ignored until > > I hit some arbitrary keys very rapidly. The USB amnesia > > starts again if I leave the input device untouched for > > some seconds. The issue will not occur for newly > > connected devices or if I reconnect mouse/keyboard. The > > dock is not the issue as I can reproduce the phenomenon > > with a USB mouse directly connected to the laptop. > > > > I am looking for ways to correctly diagnose things to file > > a bug (against which package: xorg-input, kernel/driver, > > ...). > > I've had a similar problem with my T410, running sid. > I was losing the first few keystrokes when I begin typing on a USB > keyboard. I didn't connect it with sleeping.
I resolved my (not OP) issue by adding the USB IDs of the mouse and keyboard (from lsusb) to the /etc/laptop-mode/conf.d/runtime-pm.conf AUTOSUSPEND_RUNTIME_DEVID_BLACKLIST variable. > At the moment (typing on USB keyboard I plugged in to test) > I don't see the problem. > > Linux version 3.16.0-4-amd64 (debian-ker...@lists.debian.org) (gcc version > 4.8.3 (Debian 4.8.3-13) ) #1 SMP Debian 3.16.7-2 (2014-11-06) > > cheers, > > Joel > > > dmesg shows on device attachment/boot, e.g. for a cordless USB mouse: > > [316267.291416] usb 3-1.2: new low-speed USB device number 7 using ehci-pci > > [316267.390581] usb 3-1.2: New USB device found, idVendor=046d, > > idProduct=c521 > > [316267.390588] usb 3-1.2: New USB device strings: Mfr=1, Product=2, > > SerialNumber=0 > > [316267.390591] usb 3-1.2: Product: USB Receiver > > [316267.390593] usb 3-1.2: Manufacturer: Logitech > > [316267.397463] input: Logitech USB Receiver as > > /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:046D:C521.002D/input/input60 > > [316267.397850] hid-generic 0003:046D:C521.002D: input,hidraw0: USB HID > > v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input0 > > [316267.405442] input: Logitech USB Receiver as > > /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.1/0003:046D:C521.002E/input/input61 > > [316267.406232] hid-generic 0003:046D:C521.002E: input,hiddev0,hidraw1: USB > > HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input1 > > > > on wakeup (all USB related messages) > > [316278.048335] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI > > [316278.048401] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI > > [316278.048465] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI > > [316278.048543] PM: noirq resume of devices complete after 15.665 msecs > > ... > > [316278.428114] usb 3-1.1: reset full-speed USB device number 3 using > > ehci-pci > > [316278.592293] usb 3-1.6: reset high-speed USB device number 6 using > > ehci-pci > > > > lsusb (after resume) > > sts@nbof08:~$ lsusb > > Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub > > Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > Bus 003 Device 006: ID 04f2:b2da Chicony Electronics Co., Ltd > > Bus 003 Device 005: ID 0a5c:21e6 Broadcom Corp. BCM20702 Bluetooth 4.0 > > [ThinkPad] > > Bus 003 Device 004: ID 147e:2020 Upek TouchChip Fingerprint Coprocessor > > (WBF advanced mode) > > Bus 003 Device 007: ID 046d:c521 Logitech, Inc. Cordless Mouse Receiver > > Bus 003 Device 003: ID 17ef:1003 Lenovo Integrated Smart Card Reader > > Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub > > Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub > > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > > > Xorg.0.log (info refering to device attachment, there is no info after > > resume: > > ... > > [316188.752] (II) config/udev: Adding input device Logitech USB Receiver > > (/dev/input/event14) > > [316188.752] (**) Logitech USB Receiver: Applying InputClass "evdev pointer > > catchall" > > [316188.752] (II) Using input driver 'evdev' for 'Logitech USB Receiver' > > [316188.752] (**) Logitech USB Receiver: always reports core events > > [316188.752] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event14" > > [316188.752] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521 > > [316188.752] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons > > [316188.752] (--) evdev: Logitech USB Receiver: Found scroll wheel(s) > > [316188.752] (--) evdev: Logitech USB Receiver: Found relative axes > > [316188.752] (--) evdev: Logitech USB Receiver: Found x and y relative axes > > [316188.752] (II) evdev: Logitech USB Receiver: Configuring as mouse > > [316188.752] (II) evdev: Logitech USB Receiver: Adding scrollwheel support > > [316188.752] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and > > 5 > > [316188.752] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, > > EmulateWheelInertia: 10, EmulateWheelTimeout: 200 > > [316188.752] (**) Option "config_info" > > "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:046D:C521.002D/input/inpu > > t60/event14" > > [316188.752] (II) evdev: Logitech USB Receiver: initialized for relative > > axes. > > [316188.752] (**) Logitech USB Receiver: (accel) keeping acceleration > > scheme 1 > > [316188.752] (**) Logitech USB Receiver: (accel) acceleration profile 0 > > [316188.752] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000 > > [316188.752] (**) Logitech USB Receiver: (accel) acceleration threshold: 4 > > [316188.753] (II) config/udev: Adding input device Logitech USB Receiver > > (/dev/input/mouse1) > > [316188.753] (II) No input driver specified, ignoring this device. > > [316188.753] (II) This device may have been added with another device file. > > [316188.777] (II) config/udev: Adding input device Logitech USB Receiver > > (/dev/input/event16) > > [316188.777] (**) Logitech USB Receiver: Applying InputClass "evdev > > keyboard catchall" > > [316188.777] (II) Using input driver 'evdev' for 'Logitech USB Receiver' > > [316188.777] (**) Logitech USB Receiver: always reports core events > > [316188.777] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event16" > > [316188.777] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521 > > [316188.777] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons > > [316188.778] (--) evdev: Logitech USB Receiver: Found scroll wheel(s) > > [316188.778] (--) evdev: Logitech USB Receiver: Found relative axes > > [316188.778] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes > > to exist. > > [316188.778] (--) evdev: Logitech USB Receiver: Found absolute axes > > [316188.778] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes > > to exist. > > [316188.778] (--) evdev: Logitech USB Receiver: Found keys > > [316188.778] (II) evdev: Logitech USB Receiver: Configuring as mouse > > [316188.778] (II) evdev: Logitech USB Receiver: Configuring as keyboard > > [316188.778] (II) evdev: Logitech USB Receiver: Adding scrollwheel support > > [316188.778] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and > > 5 > > [316188.778] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, > > EmulateWheelInertia: 10, EmulateWheelTimeout: 200 > > [316188.778] (**) Option "config_info" > > "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.1/0003:046D:C521.002E/input/inpu > > t61/event16" > > [316188.778] (**) Option "xkb_rules" "evdev" > > [316188.778] (**) Option "xkb_model" "pc105" > > [316188.778] (**) Option "xkb_layout" "de" > > [316188.778] (II) evdev: Logitech USB Receiver: initialized for relative > > axes. > > [316188.778] (WW) evdev: Logitech USB Receiver: ignoring absolute axes. > > [316188.778] (**) Logitech USB Receiver: (accel) keeping acceleration > > scheme 1 > > [316188.778] (**) Logitech USB Receiver: (accel) acceleration profile 0 > > [316188.778] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000 > > [316188.778] (**) Logitech USB Receiver: (accel) acceleration threshold: 4 > > > > I have no clue what could be going on... > > > > > > -- > > To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org > > with a subject of "unsubscribe". Trouble? Contact > > listmas...@lists.debian.org > > Archive: https://lists.debian.org/cn3ufkfqi1...@mid.individual.net > > > > -- > Joel Roth > > -- Joel Roth -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20150718225505.GA9337@sprite