> and get a DHCP address, but the network remains broken with errors such as: > b44: eth0: Link is down > b44: eth0: Link is up at 10 Mbps, half duplex. > b44: eth0: Flow control is off for TX and off for RX.
[...] > Using the default interface 'eth0'. > Basic registers of MII PHY #1: 1000 782d 0040 6360 0de1 0021 0004 2001. > Basic mode control register 0x1000: Auto-negotiation enabled. > You have link beat, and everything is working OK. > Your link partner is generating 10baseT link beat (no autonegotiation). > End of basic transceiver information. Have you tried using mii-tool to set speed and duplex, rather than letting it get auto-negotiated? The description above says "(no autonegotiation)" but you've got auto-negotiation enabled for the card. Some device/card combos work well with auto-negotiation enabled, and others work horribly. Maybe setting it yourself would help. (Which to set it to is probably a matter of trial and error; there are only four combos.) HTH, -- Pete Harlan [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
