On 06/20/2016 04:44 AM, Daniel A wrote: > Up until kernel 4.5.0-1 my console had the following geometry: ... > mode "1920x1200" > geometry 1920 1200 1920 1200 32 ... > Since kernel 4.5.0-2 it changed to this: > ... > mode "1024x768" > geometry 1024 768 1920 1200 32
I also compared the Xorg.0.log and it turns out that my DisplayPort started claiming that something is connected to it (I have one monitor connected to DVI port): (II) RADEON(0): EDID for output DisplayPort-0 +(II) RADEON(0): Printing probed modes for output DisplayPort-0 +(II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) +(II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) +(II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) +(II) RADEON(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e) +(II) RADEON(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) (II) RADEON(0): EDID for output HDMI-0 (II) RADEON(0): EDID for output DVI-0 ... -(II) RADEON(0): Output DisplayPort-0 disconnected +(II) RADEON(0): Output DisplayPort-0 connected (II) RADEON(0): Output HDMI-0 disconnected (II) RADEON(0): Output DVI-0 connected -(II) RADEON(0): Using exact sizes for initial modes -(II) RADEON(0): Output DVI-0 using initial mode 1920x1200 +0+0 +(II) RADEON(0): Using fuzzy aspect match for initial modes +(II) RADEON(0): Output DisplayPort-0 using initial mode 1024x768 +0+0 +(II) RADEON(0): Output DVI-0 using initial mode 1024x768 +0+0 (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. ... -(II) RADEON(0): Setting screen physical size to 508 x 317 +(II) RADEON(0): Setting screen physical size to 270 x 203 When I explicitly disable DisplayPort by adding video=DP-1:d to kernel options, everything goes back to normal.