On Fri, Nov 21, 2003 at 02:08:39AM +0000, Antony Gelberg wrote: > Hi all, > > The box is a bridging firewall, with a custom compiled kernel. I've > done this configuration loads of times, but not with these NICs. > [...]
> I'm ashamed to say that I don't know how to see which card is eth0. I'm > not on site, and I'd rather not go there just for this. I'm guessing > it's the one with the lower PCI id (the natsemi)? > > APIC is compiled into the kernel, and I've heard that removing it > might help. Anyone have any advice? (Running 2.4.18.) Hi. If you grep /var/log/dmesg (or any logfile with boot messages) for eth0 or eth1, you should be able to find out. Example from my machine: $ grep eth0 /var/log/dmesg eth0: SiS 900 Internal MII PHY transceiver found at address 1. eth0: Using transceiver found at address 1 as default eth0: SiS 900 PCI Fast Ethernet at 0xec00, IRQ 18, xx:xx:xx:xx:xx:xx. Peter -- Peter Samek [EMAIL PROTECTED] jabber: [EMAIL PROTECTED] / icq: 81758305 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
