On 02/19/2017 01:39 PM, Jimmy Johnson wrote:
On 02/19/2017 04:37 AM, Stephen P. Molnar wrote:
This will probably turn out to be a forehead slapping red faced problem,
but this used to work.
I Had a Debian v-8.x catastrophe and had to reinstall. I have several
hard drives on the computer and, of course the installer only found
/dev/sda.
Here are the results of blkid:
comp@AbNormal:~$ sudo blkid
[sudo] password for comp:
/dev/sdb1: UUID="d65867da-c658-4e35-928c-9dd2d6dd5742" TYPE="ext4"
PARTUUID="0003d403-01"
/dev/sdb2: UUID="007c1f16-34a4-438c-9d15-e3df601649ba" TYPE="ext4"
PARTUUID="0003d403-02"
/dev/sda1: UUID="3a2e7e1d-3365-447b-85c5-f454a2f0b446" TYPE="ext4"
PARTUUID="cdf775c6-01"
/dev/sda5: UUID="92727ce9-2cff-40f5-b6d0-e9580afdeef3" TYPE="swap"
PARTUUID="cdf775c6-05"
I edited fstab:
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name
devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=3a2e7e1d-3365-447b-85c5-f454a2f0b446 / ext4
errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=92727ce9-2cff-40f5-b6d0-e9580afdeef3 none swap sw
0 0
/dev/sr0 /media/cdrom0 udf,iso9660 user,noauto 0 0
#UUID=d65867da-c658-4e35-928c-9dd2d6dd5742 /dev/sdb1 ext4
errors=remount-ro 0 1
#UUID=007c1f16-34a4-438c-9d15-e3df601649ba /dev/sdb2 ext4
errors=remount-ro 0 1
I multi-boot and I like to keep things simple, including grub, I like a
neat menu.lst and fstab too and I always keep these things backed up
while installing a new system, this is the way I would do your fstab so
I can edit sdb1 and sdb2, note no auto mount on sdb1 and sdb2, but you
can now read and write.
/dev/sda1 / ext4 errors=remount-ro 0 1
/dev/sda5 none swap sw 0 0
/dev/sdb1 /mnt/sdb1 ext4 noauto,users,exec,relatime 0 0
/dev/sdb2 /mnt/sdb2 ext4 noauto,users,exec,relatime 0 0
/dev/sr0 /media/cdrom udf,iso9660 noauto,users 0 0
If you use the above you will need to make two folders in /mnt named
sdb1 and sdb2
What have I missed?
I don't think you missed anything, just didn't know what you where
doing. :)
Thanks in advance.
regard,
Not know what I'm doing is nothing new.
That's hardly a useful response.
--
Stephen P. Molnar, Ph.D. Life is a fuzzy set
www.molecular-modeling.net Stochastic and multivariate
(614)312-7528 (c)
Skype: smolnar1
