*Hi, Guys!*
I am trying to use my USB Token on Debian Jessie, but it turns on the
light, and in three seconds, it turns off. So, the USB Token stops working.
I found in the Internet that it can be a power problem. They recommended to
run the following command:
*echo 'on' | tee /sys/bus/usb/devices/usb2/power/level*
It changes the value on that file, but the behavior remains the same.
In this way, I ask for help. My Debian informations are below.
*uname -na*
Linux ncc1701 3.16.0-4-amd64 #1 SMP Debian 3.16.39-1 (2016-12-30) x86_64
GNU/Linux
*lsusb*
Bus 001 Device 002: ID 8087:8001 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 007: ID 0bda:5754 Realtek Semiconductor Corp.
Bus 002 Device 006: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card
Reader Controller
Bus 002 Device 005: ID 04f3:2013 Elan Microelectronics Corp.
Bus 002 Device 004: ID 8087:0a2a Intel Corp.
Bus 002 Device 011: ID 046d:c52f Logitech, Inc. Unifying Receiver
*Bus 002 Device 015: ID 1059:0017 Giesecke & Devrient GmbH (that is my USB
Token)*
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
*lsusb -t*
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/11p, 480M
* |__ Port 1: Dev 15, If 0, Class=Chip/SmartCard, Driver=, 12M*
|__ Port 3: Dev 11, If 0, Class=Human Interface Device, Driver=usbhid,
12M
|__ Port 3: Dev 11, If 1, Class=Human Interface Device, Driver=usbhid,
12M
|__ Port 5: Dev 4, If 0, Class=Wireless, Driver=btusb, 12M
|__ Port 5: Dev 4, If 1, Class=Wireless, Driver=btusb, 12M
|__ Port 6: Dev 5, If 0, Class=Human Interface Device, Driver=usbhid,
12M
|__ Port 7: Dev 6, If 0, Class=Vendor Specific Class, Driver=rtsx_usb,
480M
|__ Port 8: Dev 7, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 8: Dev 7, If 1, Class=Video, Driver=uvcvideo, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M
*dmesg | grep 1059*
[ 1.612648] usb 2-1: New USB device found, idVendor=1059, idProduct=0017
[ 1002.610934] usb 2-1: New USB device found, idVendor=1059, idProduct=0017
[ 1053.523985] usb 2-2: New USB device found, idVendor=1059, idProduct=0017
[ 1090.249734] usb 2-2: New USB device found, idVendor=1059, idProduct=0017
[ 1762.296078] usb 2-1: New USB device found, idVendor=1059, idProduct=0017
[ 1788.281211] usb 2-1: New USB device found, idVendor=1059, idProduct=0017
[ 1794.658211] usb 2-2: New USB device found, idVendor=1059, idProduct=0017
[ 1997.061059] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz),
(N/A, 0 mBm), (N/A)
[ 7282.511744] usb 2-1: New USB device found, idVendor=1059, idProduct=0017
*dmesg | grep 0017*
[ 0.744411] Freeing unused kernel memory: 216K (ffff8800017ca000 -
ffff880001800000)
[ 1.612648] usb 2-1: New USB device found, idVendor=1059, idProduct=0017
[ 1002.610934] usb 2-1: New USB device found, idVendor=1059, idProduct=0017
[ 1053.523985] usb 2-2: New USB device found, idVendor=1059, idProduct=0017
[ 1090.249734] usb 2-2: New USB device found, idVendor=1059, idProduct=0017
[ 1762.296078] usb 2-1: New USB device found, idVendor=1059, idProduct=0017
[ 1788.281211] usb 2-1: New USB device found, idVendor=1059, idProduct=0017
[ 1794.658211] usb 2-2: New USB device found, idVendor=1059, idProduct=0017
[ 7282.511744] usb 2-1: New USB device found, idVendor=1059, idProduct=0017
Thank you for any help!
Regards,
Gustavo Martinelli
