Richard Hector wrote:
> On 02/03/18 03:09, Marc Auslander wrote:
>>> I think you can usually set the power-on behaviour in the BIOS (or EFI,
>>> presumably) - independently of the OS or any shutdown process.
>> So here's the issue - maybe I'm missing something.
>> If I configure apcupsd to shutdown on power fail and the power really
>> stays off till the apc unit shut down, my machine will reboot on power
>> up. But what if the power comes back once the daemon has started the
>> What is needed is a guaranteed power cycle from the apc unit - which
>> AFAIK is not an option.
> Interesting point.
> I confess I've never set up a ups for all this before, but I've read
> about it ... I'm pretty sure you can instruct the ups to shut down, but
> I don't know whether you can tell it to come back as soon as the power
> is stable (possibly immediately).
> I guess you could go more extreme, and have the ups controlled by
> something else, like a battery-powered Raspberry Pi ... does the ups
> listen for instructions in its 'down' state?
This seems to be a common use case but depends on server (bios) and UPS
I just checked our setup here and it is to toggle the option "Power On after
Power Fail" in the BIOS. This brings the server back when power is on only
if power fail was registered.
I am not sure if there is a setting to stop the shut down process if
meanwhile power is back.