On my Jessie system, for something like the last 2 to 3 months, I've been getting an error like the following whenever I do an apt-get update / apt-get upgrade cycle.
I've been ignoring it, hoping it would go away with some future update, but so far it hasn't. The (edited) error message is shown below. Suggestions? I'm a little afraid to reboot the machine at this point. The real issue (afaict) is the: <quote> Errors were encountered while processing: linux-image-3.16.0-7-amd64 linux-image-amd64 initramfs-tools </quote> I see two sort of possibilities from reading the errors the first doesn't seem possible -- I'm out of space on stdout?? And, if it has to do with those missing drivers / firmware, why did this only start happening 2 or 3 months ago. I don't even know if I have any hardware that needs those drivers -- let me see, I guess I can do an lsmod ... Ok, it looks like I have the r8169 as I see this: r8169 68066 0 Are these missing drivers the proprietary ones? (AFAIR, when I did the install, I did not install or attempt to install proprietary drivers, although that may have been 4 years ago. Is that the problem? If so, what do I do about it? <quote> root@s31:~# apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done .... <I deleted a bunch of lines that either didn't appear relevant or are duplicates of most of those below -- the sequence of "Possible missing firmware" messages is repeated 3 times, once for each of linux-image-3.16.0-7-amd64, linux-image-amd64, and initramfs-tools> Setting up poppler-utils (0.26.5-2+deb8u7) ... Setting up sndfile-programs (1.0.25-9.1+deb8u2) ... Processing triggers for initramfs-tools (0.120+deb8u3) ... update-initramfs: Generating /boot/initrd.img-3.16.0-6-amd64 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168g-3.fw for module r8169 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168g-2.fw for module r8169 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8106e-2.fw for module r8169 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8106e-1.fw for module r8169 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8411-2.fw for module r8169 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8411-1.fw for module r8169 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8402-1.fw for module r8169 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168f-2.fw for module r8169 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8105e-1.fw for module r8169 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168e-3.fw for module r8169 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168e-2.fw for module r8169 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168e-1.fw for module r8169 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168d-2.fw for module r8169 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168d-1.fw for module r8169 gzip: stdout: No space left on device E: mkinitramfs failure cpio 141 gzip 1 update-initramfs: failed for /boot/initrd.img-3.16.0-6-amd64 with 1. dpkg: error processing package initramfs-tools (--configure): subprocess installed post-installation script returned error exit status 1 Processing triggers for libc-bin (2.19-18+deb8u10) ... Errors were encountered while processing: linux-image-3.16.0-7-amd64 linux-image-amd64 initramfs-tools E: Sub-process /usr/bin/dpkg returned an error code (1) root@s31:~# </quote>