Hi Georgi I noticed that kernel logs you posted are between 62nd - 64th second > after kernel loading. Why is the boot process so slow? >
Due to a disabled SATA device in BIOS, the kernel tries to do an ERST and SRST and does this until 60s after boot. That's OK, it's been the same on Buster, too. > If you think that video driver can be an issue then you can try to > configure the system not to use framebuffer (if the system > doesn't use GUI). > Could you tell me how? Or a reference to it? In the meantime I re-configured grub to boot with the following parameters: debug rootwait earlyprintk=vga,keep earlycon pause_on_oops=5 panic=60 no_console_suspend The last two boots now show a crash in the console - even with firmware-amd-graphics and firmware-linux-nonfree installed. [ 69.546005 ] asm_call_irq_on_stack+0x12/0x20 [ 69.546005 ] </IRQ> [ 69.546006 ] common_interrupt+0xb0/0x130 [ 69.546006 ] asm_common_interrupt+0x1e/0x40 [ 69.546006 ] RIP: 0010:cpuidle_enter_state+0xc4/0x350 [ 69.546007 ] Code: a2 ff 65 8b 3d 6d 39 f7 7b e8 78 2e a2 ff 49 89 c5 66 66 66 66 90 31 ff e8 09 39 a2 ff 45 84 ff 0f 85 fa 00 00 00 fb 66 66 90 <66> 66 90 45 85 f6 0f 88 06 01 00 00 49 63 c6 4c 2b 2c 24 48 8d 14 [ 69.546008 ] RSP: 0018:ffff9dec062cfea8 EFLAGS: 00000246 [ 69.546008 ] RAX: ffff89266fa2bc00 RBX: 0000000000000004 RCX: 000000000000001f [ 69.546009 ] RDX: 0000000000000000 RSI: 0000000024eefefa RDI: 0000000000000000 [ 69.546009 ] RBP: ffffbdebff218e00 R08: 0000001022521b20 R09: 0000000000000018 [ 69.546010 ] R10: 00000000000004fa R11: 000000000000006cd R12: ffffffff851ae680 [ 69.546010 ] R13: 0000001022521b20 R14: 00000000000000004 R15: 0000000000000000 [ 69.546010 ] ? cpuidle_enter_state+0xb7/0x350 [ 69.546011 ] cpuidle_enter+0x29/0x40 [ 69.546011 ] do_idle+0x1ef/0x2b0 [ 69.546011 ] cpu_startup_entry+0x19/0x20 [ 69.546012 ] secondary_startup_64_no_verify+0xb0/0xbb [ 69.546012 ] ---[ end trace 96fbf4be0200356d ]--- And on another crash almost the same but slightly different: [ 69.331313 ] ? mwait_idle_with_hints.constprop.0+0x4b/0x90 [ 69.331313 ] ? mwait_idle_with_hints.constprop.0+0x4b/0x90 [ 69.331313 ] </NMI> [ 69.331314 ] intel_idle+0x1f/0x30 [ 69.331314 ] cpuidle_enter_state+0x89/0x350 [ 69.331314 ] cpuidle_enter+0x29/0x40 [ 69.331315 ] do_idle+0x1ef/0x2b0 [ 69.331315 ] cpu_startup_entry+0x19/0x20 [ 69.331315 ] start_kernel+0x587/0x5a8 [ 69.331315 ] secondary_startup_64_no_verify+0xb0/0xbb [ 69.511534 ] DMAR: [DMA Read] Request device [00:1e.0] PASID ffffffff fault ad r 3000 [fault reason 06] PTE Read access is not set [ 69.511541 ] Kernel Offset: 0x28a00000 from 0xffffffff81000000 (relocation ran ge: 0xffffffff80000000-0xffffffffbfffffff) I have recorded the boot crash: https://youtu.be/TIfX-isjM3E (see between second 47 and 48).
