Debian 11 patched kernel is out!
That will fix everyone who have been affected and they didn't switched
to older kernel or compiled their own.
linux-signed-amd64 (5.10.46+3) unstable; urgency=medium
* Sign kernel from linux 5.10.46-3
* [armhf] Add mdio-aspeed to nic-modules.
Thanks to Joel Stanley <j...@jms.id.au> (Closes: #991262)
* Revert "drm/amdgpu/gfx9: fix the doorbell missing when in CGPG issue."
(Closes: #990312)
* Revert "drm/amdgpu/gfx10: enlarge CP_MEC_DOORBELL_RANGE_UPPER to
cover full
doorbell." (Closes: #990312)
* Input: joydev - prevent use of not validated data in JSIOCSBTNMAP ioctl
(CVE-2021-3612)
* sctp: validate from_addr_param return (CVE-2021-3655)
* sctp: add size validation when walking chunks (CVE-2021-3655)
* [s390x] sclp_vt220: fix console name to match device (Closes: #961056)
* block: return the correct bvec when checking for gaps
* sctp: fix return value check in __sctp_rcv_asconf_lookup
-- Salvatore Bonaccorso <car...@debian.org> Wed, 28 Jul 2021 07:55:40
+0200
On 24/07/2021 04:32, piorunz wrote:
On 23/07/2021 23:44, The Wanderer wrote:
https://gitlab.freedesktop.org/drm/amd/-/issues/1632 as being an
upstream(?) bug report which covers it. Not sure how directly applicable
those are, but just in case...
That escalated very quickly :D This bug is responsible for this. And
patch works.
I compiled my own 5.10 kernel using Debian source, and I patched that
one line in drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c file. Now I rebooted
to my custom 5.10 kernel and it works :)
Let's see - before:
$ sensors
(...)
amdgpu-pci-0900
(...)
power1: 74.00 W (cap = 272.00 W)
gpu-mon (from rickslab-gpu-utils)
┌─────────────┬────────────────────┐
│Card # │card0 │
├─────────────┼────────────────────┤
│Model │ Navi 21 RX │
│GPU Load % │99 │
│Mem Load % │0 │
│VRAM Usage % │4.839 │
│GTT Usage % │0.802 │
│Power (W) │75.0 │
│Power Cap (W)│272.0 │
│Energy (kWh) │0.0 │
│T (C) │53.0 │
│VddGFX (mV) │1143 │
│Fan Spd (%) │0 │
│Sclk (MHz) │2470 │
│Sclk Pstate │1 │
│Mclk (MHz) │1000 │
│Mclk Pstate │3 │
│Perf Mode │0-BOOTUP_DEFAULT │
└─────────────┴────────────────────┘
And after:
$ sensors
(...)
amdgpu-pci-0900
(...)
power1: 34.00 W (cap = 272.00 W)
┌─────────────┬────────────────────┐
│Card # │card0 │
├─────────────┼────────────────────┤
│Model │ Navi 21 RX │
│GPU Load % │0 │
│Mem Load % │0 │
│VRAM Usage % │6.109 │
│GTT Usage % │1.147 │
│Power (W) │35.0 │
│Power Cap (W)│272.0 │
│Energy (kWh) │0.004 │
│T (C) │54.0 │
│VddGFX (mV) │856 │
│Fan Spd (%) │0 │
│Sclk (MHz) │500 │
│Sclk Pstate │0 │
│Mclk (MHz) │1000 │
│Mclk Pstate │3 │
│Perf Mode │0-BOOTUP_DEFAULT │
└─────────────┴────────────────────┘
0% GPU core use, 0% memory use, core clock is 500 MHz instead of maxed
out at 2470 Mhz. Success!
Power usage is on par with Windows.
However, I still have 34W even if I disconnect second monitor. On
Windows, with one monitor only power goes down to 10W and core is 10
MHz. But my default setup it 2 monitors so I don't worry too much anyway :)
--
With kindest regards, piorunz.
⢀⣴⠾⠻⢶⣦⠀
⣾⠁⢠⠒⠀⣿⡁ Debian - The universal operating system
⢿⡄⠘⠷⠚⠋⠀ https://www.debian.org
⠈⠳⣄⠀⠀⠀⠀
