On Tue, Nov 10, 2026 at 10:49 PM Angela Arch Linux <[email protected]>
wrote:

> Hi,
>
> Since you mentioned the same kernel works on Fedora, it's likely a missing
> power management daemon or firmware dependency in Debian.
>
> Try installing "thermald" (Intel) or "amd64-microcode" (AMD).
> Also, check if your CPU requires the specific P-State driver:
>

I have:
amd64-microcode/testing,now 3.20260923.1 amd64 [installed]
 Platform firmware and microcode for AMD CPUs and SoCs

and
intel-microcode/testing,now 3.20260925.1 amd64 [installed]
 Processor microcode firmware for Intel CPUs

My processor is actually AMD.

For PState I have:
librte-power-amd-pstate26/testing,now 25.11.4-1 amd64 [installed]
 Data Plane Development Kit (librte-power-amd-pstate runtime library)

sudo apt install thermald intel-microcode
> sudo systemctl enable --now thermald
>

I installed thermald but it is not supported.
Nov 11 00:04:54 hp-pavilion.home.arpa systemd[1]: Starting thermald.service
- Thermal Daemon Service...
Nov 11 00:04:54 hp-pavilion.home.arpa thermald[33197]: Unsupported cpu
model or platform

After rebooting, check if "Performance" appears in "powerprofilesctl list".
>
> Another possibility: Fedora might be loading a specific firmware that
> Debian
> keeps in "non-free-firmware". Check "dmesg | grep -i power" to see if
> the CPU is complaining about missing ACPI or thermal tables.
>

sudo dmesg | grep -i power
[    0.246664] thermal_sys: Registered thermal governor 'power_allocator'
[    0.418642] ACPI: \_SB_.PCI0.GPP2.DEV0.PWRE: New power resource
[    0.419128] ACPI: \_SB_.PCI0.GP17.XHC0.P0U0: New power resource
[    0.419172] ACPI: \_SB_.PCI0.GP17.XHC0.P3U0: New power resource
[    0.419434] ACPI: \_SB_.PCI0.GP17.XHC1.P0U1: New power resource
[    0.419477] ACPI: \_SB_.PCI0.GP17.XHC1.P3U1: New power resource
[    0.419741] ACPI: \_SB_.P0S0: New power resource
[    0.419757] ACPI: \_SB_.P3S0: New power resource
[    0.419802] ACPI: \_SB_.P0S1: New power resource
[    0.419817] ACPI: \_SB_.P3S1: New power resource
[    0.422872] ACPI: \_SB_.PRWL: New power resource
[    0.429670] Low-power S0 idle used by default for system suspend
[    0.448425] pci 0000:04:00.1: D0 power state depends on 0000:04:00.0
[    0.448434] pci 0000:04:00.3: extending delay after power-on from D3hot
to 20 msec
[    0.448579] pci 0000:04:00.4: extending delay after power-on from D3hot
to 20 msec
[    0.958457] PM: genpd: Disabling unused power domains
[    1.122915] input: Power Button as
/devices/platform/PNP0C0C:00/input/input1
[    1.124077] ACPI: button: Power Button [PWRB]
[    6.458155] sr 1:0:0:0: Power-on or device reset occurred
[   24.492652] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by
18:a5:ff:1c:da:27

The only thing that stood out was:
[    0.958457] PM: genpd: Disabling unused power domains

Tim


> Hope this helps.
>
>
> ---- 回复的原邮件 ----
> 发件人 Timothy M Butterworth<[email protected]>
> <[email protected]>
> 日期 2026年11月11日 08:50
> 收件人 derlyne<[email protected]> <[email protected]>
> 抄送至 Debian User<[email protected]>
> <[email protected]>
> 主题 Re: Power Profiles not supported
>
>
> On Tue, Nov 10, 2026 at 7:26 AM derlyne <[email protected]>
> wrote:
>
>> The package to install to manage power profiles is
>> `power-profiles-daemon`. It provides the system service and the
>> `powerprofilesctl` command; the required dependencies are installed
>> automatically.
>>
>> sudo apt install power-profiles-daemon
>> sudo systemctl enable --now power-profiles-daemon
>>
>
> I already have this installed and running.
>
> To display and change profiles graphically, the interface depends on your
>> desktop environment: GNOME and KDE Plasma include this functionality in
>> their settings or power-management tools. You generally don’t need to
>> install a separate package if those components are already installed.
>>
>
> I have KDE.
>
>
>>
>> Check the detected profiles with:
>>
>> powerprofilesctl list
>>
>>
>> “Power Saver” and “Balanced” are normally available; “Performance”
>> depends on hardware support.
>>
>
>  Performance shows up if I boot Fedora and I am able to switch the
> profiles from the system tray battery widget. Both Fedora and Forky have
> the 7.2 Linux kernel so it does not appear to be a kernel support issue.
>
>
>> (... gmail...)
>>
>
>
> --
> ⢀⣴⠾⠻⢶⣦⠀
> ⣾⠁⢠⠒⠀⣿⡁ Debian - The universal operating system
> ⢿⡄⠘⠷⠚⠋⠀ https://www.debian.org/
> ⠈⠳⣄⠀⠀
>


-- 
⢀⣴⠾⠻⢶⣦⠀
⣾⠁⢠⠒⠀⣿⡁ Debian - The universal operating system
⢿⡄⠘⠷⠚⠋⠀ https://www.debian.org/
⠈⠳⣄⠀⠀

Reply via email to